Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-26T22:47:01.611Z Has data issue: false hasContentIssue false
  • English
  • Français

Size Effect on Bending Properties of Diamond-Like Carbon Nanopillar Fabricated by Focused Ion-Beam Assisted Chemical Vapor Deposition

Published online by Cambridge University Press:  21 March 2011

Yasuo Kogo ,
Hiroyuki Harada ,
Yoji Shibutani ,
Naomichi Sakamoto  and
Takuya Yasuno
Yasuo Kogo
Affiliation:
Department of Material Science and Technology, Tokyo University of Science, 2641, Yamazaki, Noda 278-8510, Japan
Hiroyuki Harada
Affiliation:
Department of Material Science and Technology, Tokyo University of Science, 2641, Yamazaki, Noda 278-8510, Japan
Yoji Shibutani
Affiliation:
Department of Mechanical Engineering, Osaka University, 2-1, Yamadaoka, Suita, Osaka 565-0871, Japan
Naomichi Sakamoto
Affiliation:
Department of Science and Technology, Iwaki Meisei University, 5-5-1, Chuodai-Iino, Iwaki 970-8551, Japan
Takuya Yasuno
Affiliation:
Department of Science and Technology, Iwaki Meisei University, 5-5-1, Chuodai-Iino, Iwaki 970-8551, Japan
Get access

Abstract

Bending tests of Diamond-Like Carbon (DLC) nanopillars fabricated by Focused Ion-Beam assisted Chemical Vapor Deposition (FIB-CVD) were carried out in a scanning electron microscope (SEM) to investigate their mechanical behavior. Special attention was paid on the effect of the specimen size. The nanopillars with nano-sized diameter and micro-sized length were grown using spot irradiation without scanning FIB. The diameter of the nanopillars was changed in the range of 100 ~ 1000 nm by changing the magnitude of defocusing FIB.

In the bending tests, brittle fracture was observed for the nanopillars with diameter of 1000 nm. On the contrary, large deformation without brittle fracture was confirmed in the specimens with diameter of 300 nm. In addition, the pillar recovered its original shape after unloading without any permanent deformation even after the large deformation.

Transmission electron microscope (TEM) analysis revealed that the pillars had uniform amorphous structures regardless of the diameters if the FIB was defocused during processing. In addition, similar gallium (Ga) content and sp2/sp3 fraction were observed in both specimens. These results indicate that difference in microstructures cannot be the reason for that in mechanical behavior. In other words, it must be caused by the intrinsic size effect on the mechanical properties of DLC fabricated by FIB-CVD process.

Keywords

ion-beam assisted depositionmicrostructurefracture
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1297: Symposium P – Deformation Mechanisms, Microstructure Evolution and Mechanical Properties of Nanoscale Materials , 2011 , mrsf10-1297-p10-30
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Hoshino, T., Ozawa, A., Kometani, R., Suzuki, T., Matsui, S. and Mabuchi, K., “Development of a regeneration-type neural interface: A microtube guide for axon growth of neuronal cells fabricated using focused-ion-beam chemical vapor deposition”, J. Vac. Sci. Technol. B 24, 2538–2543, (2006).Google Scholar
2. Sakamoto, N., Kogo, Y., Yagi, T., Yasuno, T., Taniguchi, J., Miyamoto, I.: “Optimization of Processing Condition for Deposition of DLC using FIB-CVD Method”, JSME International Journal, Ser. C, 49 (2), 361–369 (2006).Google Scholar
3. Sakamoto, N., Kogo, Y., Yasuno, T., Taniguchi, J., Miyamoto, I.: “Analysis on microstructure of interface layer in DLC/Si structures produced by FIB-CVD”, Diamond and Related Materials, 17, 1706–1709 (2008).Google Scholar
4. Robertson, J.: “Diamond-like amorphous carbon”, Materials Science and Engineering R 37, 129–281, (2002)Google Scholar
5. Morita, T., Kometani, R., Watanabe, K., Kanda, K., Hoshino, T., Kondo, K., Kaito, T., Ichihashi, T., Fujita, J., Ishida, M., Ochiai, Y., Tajima, T. and Matsui, S., “Free-space-wiring fabrication in nano-space by focused-ion-beam chemical vapor deposition”, J. Vac. Sci. Techol. B 21, 2737–2741, (2003).Google Scholar