Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-11-25T17:52:30.319Z Has data issue: false hasContentIssue false
  • English
  • Français

Simulation of Temperature Effects during Rapid Thermal Processing

Published online by Cambridge University Press:  25 February 2011

R. Kakoschek  and
E. BuβMann
R. Kakoschek
Affiliation:
Siemens AG. HL T 312, Otto-Hahn-Ring 6, D-8000 MHnche83n, FRG
E. BuβMann
Affiliation:
Siemens AG. HL T 312, Otto-Hahn-Ring 6, D-8000 MHnche83n, FRG
Get access

Abstract

A complete theory of wafer heating during rapid thermal processing (RTP) is presented. Excellent agreement with experimental results of two commercial RTP systems is obtained. The temperature uniformity is limited by radiation loss at the wafer edge in the stationary state and by nonuniform illumination of the wafer during ramp-up. Structures on wafers are also potential sources for nonuniform heating. Considerable dynamic temperature inhomogeneities during rap-up might limitfu ture applications of RTPe specially when wafer sizes become larger. Possible improvements are suggested regarding adequate process cycling, chip and equipment design.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 146: Symposium B – Rapid Thermal Annealing/Chemical Vapor Deposition and Integrated Processing , 1989 , 473
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

LITERATURE

[1] Lord, H.A., IEEE Transactions on Semiconductor Manufacturing, 1 (3), 105 (1988).CrossRefGoogle Scholar
[2] Shieh, T.-J., Carter, R.L., IEEE Transactions on Electron Devices, 26 (1), 19 (1989).Google Scholar
[3] Hill, C., and Jones, S., in: Reduced Thermal Processing for ULSI, ed. Levy, R.A.. (Plenum Press, 1989) in press.Google Scholar
[4] Seidel, T.E., Lischner, S.J., Pai, C.S., and Lau, S.S., J. Appl. Phys. 5, 1317 (1985).CrossRefGoogle Scholar
[5] Kakoschke, R., Bulmann, E., Föll, H., submitted for publication in Appl. Phys.Google Scholar
[6] Kakoschke, R., Nucl. Instr. and Meth. (Proceedings of the 7th International Conference on Ion Implantation and Technology), B37/38, 753 (1989).Google Scholar
[7] Kakoschke, R., Bupmann, E., Föll, H., submitted for publication in Appl. Phys.Google Scholar