Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-25T17:39:57.506Z Has data issue: false hasContentIssue false
  • English
  • Français

Silicon Homoepitaxy at 300°C Using ArF Excimer Laser Photolysis of Disilane

Published online by Cambridge University Press:  26 February 2011

B. Fowler ,
T. Lian ,
D. Bullock  and
S. Banerjee
B. Fowler
Affiliation:
Microelectronics Research Center, University of Texas, Austin, TX 78712.
T. Lian
Affiliation:
Microelectronics Research Center, University of Texas, Austin, TX 78712.
D. Bullock
Affiliation:
Microelectronics Research Center, University of Texas, Austin, TX 78712.
S. Banerjee
Affiliation:
Microelectronics Research Center, University of Texas, Austin, TX 78712.
Get access

Abstract

Photolysis of Si2H6 by an ArF excimer laser has been used to deposit Si homoepitaxial layers at temperatures as low as 300°C. The chemical vapor deposition process at growth rates from 0.5-4 Å/minute is performed in an ultra-high vacuum chamber which, along with an ex situ HF dip and a novel in situ hydrogen clean using laser excitation, results in minimization of oxygen and carbon contamination which inhibits Si epitaxy. The growth involves photolytic decomposition of Si2H6 and the generation and adsorption of SiH2 precursors on the hydrogenated Si surface, which is the rate limiting step. Growth rates are observed to vary proportionally with laser power. Very low defect density films in terms of stacking faults and dislocation loops (less than 105 cm−2), and excellent crystallinity have been deposited as confirmed by Schimmel etching and Nomarski microscopy, transmission electron microscopy, electron diffraction and in situ reflection high energy electron diffraction.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 201: Symposium A – Surface Chemistry and Beam-Solid Interactions , 1990 , 153
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Breaux, L., Anthony, B., Hsu, T., Banerjee, S. and Tasch, A., Appl. Phys. Lett., 55(18), 1989 Google Scholar
2. Itoh, U., Toyoshima, Y. and Onuki, H., J.Chem. Phys., 85 (9), 4867 (1986).Google Scholar
3. Eres, D., Lowndes, D., Geohegan, D. and Mashburn, D., Mat. Res. Soc. Symp. Proc., vol. 101, 355 (1988).Google Scholar
4. Yamazaki, T., Watanabe, S., Sugii, T. and Ito, T., IEEE Int.Elec. Dev. Meet. Tech. Dig., 1987 Google Scholar
5. Suda, Y., Lubben, D., Motooka, T. and Greene, J., J.Vac. Sci. Technol. B7(5), 1171 (1989).Google Scholar
6. Konagai, M., Nishida, S., Yamada, A., Shiimoto, T., Karasawa, S. and Takahashi, K., Mat. Res. Soc. Symp. Proc., vol. 71, 119 (1986).Google Scholar
7. Anthony, B., Breaux, L., Hsu, T., Banerjee, S. and Tasch, A., J.Vac. Sci. Technol. B 7(4), 621, (1989).Google Scholar
8. Lian, S., Fowler, B., Bullock, D. and Banerjee, S., submitted to Appl. Phys. Lett., August, 1990 Google Scholar