Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-29T07:45:26.624Z Has data issue: false hasContentIssue false
  • English
  • Français

Silicon Carbide bipolar power devices - potentials and limits

Published online by Cambridge University Press:  21 March 2011

Ranbir Singh
Ranbir Singh*
Affiliation:
Cree Inc., 4600 Silicon Dr., Durham NC 27703. 919-313-5540; 919-313-5696, [email protected]
Get access

Abstract

Bipolar devices made with SiC offer 20–50X lower switching losses as compared to conventional semiconductors, and a comparable on-state voltage drop at sufficiently high current densities. To exploit the tremendous advantages offered by SiC for bipolar power devices, it is important to understand the relevant voltage/current range, fundamental limits and technological challenges in order to develop this technology commercially. The opportunity of operating a device at a high current density (>300 A/cm2) to increase total current with reasonable yield, the poor reliability of MOS at high temperatures, and the relatively low channel mobilities obtained in 4H-SiC MOSFETs may make certain bipolar devices more attractive even as low as 1700 V. The total power loss in various bipolar devices is analyzed and compared to fundamental operational limits in order to find the applicability of various devices to advanced applications.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 640: Symposium H – Silicon Carbide-Materials, Processing, and Devices , 2000 , H4.2
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Adler, M.S. and Westbrook, S.R., “Power semiconductor switching devices-A comparison based on inductive switching”, IEEE Trans. Electron Devices, vol 29, pp. 947–952, 1982.Google Scholar
[2] Kuo, D.S., Hu, C. and Sapp, S.P., “An analytical model for the power bipolar-MOS transistor”, Solid State Electronics, vol.29, No. 12, pp.1229–37, 1986.Google Scholar
[3] Baliga, B.J., Power Semiconductor Devices, PWS Publishing Co, 1996.Google Scholar
[4] Cornu, J. and Jaecklin, A., “Processes at turn-on of thyristors”, Solid State Electronics, vol 18, pp.683–89, 1975.Google Scholar
[5] Trivedi, M. et al, “Switching characteristics of MCTs and IGBTs in power converters”, IEEE Trans. Electron Devices, vol 43, pp. 1994–2003, 1996.Google Scholar
[6] Baliga, B.J., “Trends in power semiconductor devices”, IEEE Trans. Electron Devices, vol 43, pp. 1717–31, 1996.Google Scholar
[7] Lendenmann, H. and Fichtner, W., ”Turn-Off failure mechanisms in large MCT devices”, Proc. Int. Symp. Pwr. Semicond. Dev. & ICs (ISPSD '94), pp. 207–212, 1994.Google Scholar
[8] Singh, R. and Palmour, J. W., ”High Temperature characteristics of 8.6 kV 4H-SiC PiN Diode”, Proc. High temperature Electronics Conference (to be published), presented at HiTEC 2000, June 13–15 2000 Albuquerque, USA.Google Scholar
[9] Singh, R. and Palmour, J. W., “High Temperature, High Current, P-Channel UMOS 4HSiC IGBT”, Proc. 57th Device Research Conference, pp. 46–47, June 28–30, 1999. Santa Barbara, USA.Google Scholar
[10] Singh, R., Irvine, K. G. and Palmour, J. W., “4H-SiC buried gate Field Control Thyristor”, Proc. 55th Device Research Conference, pp. 34–35, June 23–25, 1997. Ft. Collins, USA.Google Scholar
[11] Edmond, J.A., “Blue LED with degenerate junction structure” US Patent 5,338,944, 1994.Google Scholar