Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-29T08:09:23.897Z Has data issue: false hasContentIssue false
  • English
  • Français

Silica Fume Effects on the Pull-Out Behavior of Randomly Oriented Steel Fibers from Concrete

Published online by Cambridge University Press:  21 February 2011

Parviz Soroushian  and
Ziadz Bayasi
Parviz Soroushian
Affiliation:
Department of Civil Engineering, Michigan State University, East Lansing, MI 48824
Ziadz Bayasi
Affiliation:
Department of Civil Engineering, Michigan State University, East Lansing, MI 48824
Get access

Abstract

Silica fume is known to improve the pore system of cementitious pastes and their adhesion capacity to fibers and other mix inclusions. This study has been mainly concerned with the effect of silica fume on the pull-out strength of randomly oriented steel fibers from concrete. Silica fume effects on the fresh mix workability and the overall flexural and compressive behavior of steel fiber reinforced and plain concretes were also assessed. The only variable in different fibrous and plain mixes was the fraction of portland cement substituted with silica fume. This fraction ranged from 0% to 20%.

The workability of plain and fibrous mixes were obtained by slump and inverted slump cone tests, respectively. In both the flexure and compression tests on fiber concrete, the complete load-deformation relationship was obtained. The pull-out strength of randomly oriented fibers was assessed through analysis of the flexural test data.

All aspects of the fresh and hardened steel fiber reinforced concrete performance considered in this study, especially the pull-out strength of randomly oriented fibers from concrete, were observed to improve with the increase in silica fume-cementitious ratio up to a certain limit, after which the trends in silica fume effects were reversed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 114: Symposium R – Bonding in Cementitious Composites , 1987 , 187
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Feldman, R.F., in Fly Ash. Silica Fume. Slag. and Natural Pozzolans in Concrete, V. 2, edited by Malhorta, V. M. (American Concrete Institute, Detroit, 1986), pp. 973–990.Google Scholar
2. ACI Committee 126, ACI Material J., 85, 158 (1987).Google Scholar
3. Ramakrishnan, V. and Srinivasan, V., the Indian Concrete J., 56, 326 (1982).Google Scholar
4. Mehta, P., Concrete Structure, Properties, and Materials (Prentice-Hall, Inc. Inglewood Cliffs, 1986), P. 75.Google Scholar
5. Robins, P. J. and Austins, S.A., in Fly Ash. Silica Fume. Slag. and Natural Pozzolans in Concrete, V. 2, edited by Malhorta, V. M. (American Concrete Institute, Detroit, 1986), pp. 941–948.Google Scholar
6. Grace, W. R. and Company, Daracem 100, production information brochure.Google Scholar
7. ELKEM Chemicals, Inc. production information brochures on Microsilica Additives.Google Scholar
8. ACI Committee 544, ACI J., 81, 140 (1984).Google Scholar
9. ACI Committee 544, State-of-the-Art Report on Fiber Reinforced Concrete (American Concrete Institute, Detroit, 1982), pp. 16.Google Scholar
10. ACI Committee 544, ACI J., 75, 283 (1978).Google Scholar
11. ASTM Standards, Concrete and Mineral Azzregates, V. 4.02 (American Society of Testing and Materials, Philadelphia, 1987), C 469, pp. 303–307; C 1018, pp. 637–644.Google Scholar
12. Soroushian, P. and Bayasi, Z., in ACI Convention on Fiber Reinforced Concrete, Baltimore, 1986.Google Scholar
13. Shah, S., Stroven, P., Dalhuison, D., and Stekelenburg, P., in Testing and Test Methods of Fiber Cement Composites, edited by Swamy, R.N. (the Construction Press, Lancaster, 1978), pp. 399–408.Google Scholar
14. Fanella, D. and Naaman, A., ACI J., 82, 475 (1985).Google Scholar
15. Bayasi, Z., Ph.D. Thesis, V. 2, Michigan State University (1988).Google Scholar