Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-25T15:42:05.513Z Has data issue: false hasContentIssue false
  • English
  • Français

Shape deformation of colloidal titania nanoparticles by means of ion irradiation

Published online by Cambridge University Press:  01 February 2011

Juan-Carlos Cheang-Wong  and
Ana-Lilia Díaz-Fonseca
Juan-Carlos Cheang-Wong
Affiliation:
[email protected], Instituto de Física, Universidad Nacional Autónoma de México, Experimental Physics Deparment, Instituto de Física, UNAM, A.P. 20-364, México, D.F., 01000, Mexico, 52-55-56225164, 52-55-56225009
Ana-Lilia Díaz-Fonseca
Affiliation:
[email protected], Instituto de Física, Universidad Nacional Autónoma de México, A.P. 20-364, México, D.F., 01000, Mexico
Get access

Abstract

Spherical submicrometer-sized titanium dioxide (TiO2 or titania) particles were prepared by the sol-gel method from hydrolysis and condensation of titanium butoxide Ti(OC4H9)4 using ammonia as a catalyst in ethanol/acetonitrile and annealing in air at 100°C. Subsequently, they were deposited onto silicon substrates, in order to form a monolayer of TiO2 particles. Then these samples were irradiated at room temperature with Si2+ ions at 4, 6 and 8 MeV, with fluences in the 2×1014-2×1015 Si/cm2 range, under an angle of 45° with respect to the sample surface. The titania particles were characterized by scanning electron microscopy to determine their size and shape before and after the ion irradiation. After the Si irradiation the spherical silica particles turned into ellipsoidal particles, as a result of the increase of the particle dimension perpendicular to the ion beam and the decrease in the direction parallel to the ion beam. This deformation effect increases monotonically with the ion fluence, and depends on the electronic energy loss of the impinging ion.

Keywords

ion-solid interactionscolloidsol-gel
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1087: Symposium V – Crystal-Shape Control and Shape-Dependent Properties – Methods, Mechanism, Theory, and Simulation , 2008 , 1087-V03-26
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Diebold, U., Surf. Sci. Reports 48, 53 (2003).Google Scholar
2. Benyagoub, A., Loffler, S., Rammensee, M. and Klaumünzer, S., Nucl. Instr. and Meth. B 65, 228 (1992).Google Scholar
3. Cheang-Wong, J.C., Radiation Effects and Defects in Solids 162, 247 (2007).Google Scholar
4. Dillen, T. van, Polman, A., Fukarek, W., Blaaderen, A. Van, Appl. Phys. Lett. 78, 910 (2001).Google Scholar
5. Cheang-Wong, J.C., Morales, U., Reséndiz, E., Oliver, A., Rodríguez-Fernández, L., J. of NonCryst. Sol. 353, 1925 (2007).Google Scholar
6. Klaumünzer, S., Nucl. Instr. and Meth. B 215, 345 (2004).Google Scholar
7. Mine, E., Hirose, M., Nagao, D., Kobayashi, Y., Konno, M., J. Colloid Interface Sci. 291, 162 (2005).Google Scholar
8. Díaz-Fonseca, A.L., Cheang-Wong, J.C., presented at the Symposium I, 2008 MRS Spring Meeting, San Francisco, CA, and accepted in the corresponding Mater. Res. Soc. Symp. Proc. Google Scholar
9. Ziegler, J.F., Biersack, J.P. and Littmark, U., The stopping and range of ions in solids, (Pergamon, New York, 1985).Google Scholar