Hostname: page-component-7bb8b95d7b-5mhkq Total loading time: 0 Render date: 2024-09-12T16:58:09.653Z Has data issue: false hasContentIssue false

Room Temperature Tensile Ductility in Polycrystalline B2 NiAl

Published online by Cambridge University Press:  26 February 2011

K. Vedula
Affiliation:
Associate Professor, Graduate Student and Research Associate, respectively Department of Materials Science and Engineering, Case Western Reserve University, Cleveland, Ohio 44106
K. H. Hahn
Affiliation:
Associate Professor, Graduate Student and Research Associate, respectively Department of Materials Science and Engineering, Case Western Reserve University, Cleveland, Ohio 44106
B. Boulogne
Affiliation:
Associate Professor, Graduate Student and Research Associate, respectively Department of Materials Science and Engineering, Case Western Reserve University, Cleveland, Ohio 44106
Get access

Abstract

Binary polycrystalline alloys of B2 NiAl, ranging from 47 to 51.5 at% Al, were prepared by casting and extrusion. These were tested in tension at temperatures ranging from 300 K to 873 K. Significant tensile ductility is observed in the near-stoichiometric alloy at room temperature as well as at 473 K in spite of the presence of only <100> dislocations. This anomaly appears to be related to the recrystallized texture, to the lower yield strength and to the presence of residual dislocations at grain boundaries in this alloy.

Type
Research Article
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Rozner, A.G. and Wasilewski, R.J., J. Inst. Met., 94, 169 (1966).Google Scholar
2. Pascoe, R.T. and Newey, C.W.A., Met. Sci. J. 2, 138 (1968).Google Scholar
3. Ball, A. and Smallman, R.E., Acta. Met., Vol.14, p. 1349 (1966).Google Scholar
4. Ball, A.B. and Smallman, R.E., Acta Met., Vol.14, p. 1517 (1966).Google Scholar
5. Wasilewski, R.J., Butler, S.R. and Hanlon, J.E., Trans. Met. Soc., AIME, Vol.239, p. 1357 (1967).Google Scholar
6. Pascoe, R.T. and Newey, C.W.A., Phys. Stat. Sol., Vol.29, p. 357 (1968).Google Scholar
7. Loretto, M.H. and Wasilewski, R.J., Phil. Mag., Vol.23, p. 1311 (1973).Google Scholar
8. Bevk, J., Dodd, R.A. and Strutt, P.R., Met. Trans., Vol.4, p. 159 (1973).Google Scholar
9. Fraser, H.L., Smallman, R.E. and Loretto, M.H., Phil. Mag., Vol.28, p. 651 (1973).Google Scholar
10. Fraser, H.L., Loretto, M.H. and Smallman, R.E., Phil. Mag., Vol.28, p. 657 (1973).Google Scholar
11. Pathare, V.M., Ph.D. Thesis, Case Western Reserve University (1987).Google Scholar