Hostname: page-component-7bb8b95d7b-cx56b Total loading time: 0 Render date: 2024-10-04T02:04:02.131Z Has data issue: false hasContentIssue false
  • English
  • Français

Retention of Ions Implanted at Non-Normal Incidence

Published online by Cambridge University Press:  25 February 2011

K.S. Grabowski ,
N.E.W. Hartley ,
C. R. Gossett  and
I. Manning
K.S. Grabowski
Affiliation:
Naval Research Laboratory, Washington, D.C. 20375,
N.E.W. Hartley
Affiliation:
Georgetown University, Washington, D.C. 20007 (Present address: Aere Harwell, UK)
C. R. Gossett
Affiliation:
Naval Research Laboratory, Washington, D.C. 20375,
I. Manning
Affiliation:
Naval Research Laboratory, Washington, D.C. 20375,
Get access

Abstract

Future applications of ion implantation require a knowledge of how the retention of implanted ions varies with angle of ion incidence. In this work the retention of 150-keV Ar,Ti,Cr,and Ta ions in AISI-M50 and 52100 bearing steels was measured for incidence angles up to 60° off normal. Fluences between 3×1015 and 3×1017/cm2 were used, typically on 3/8” diameter cylindrical samples. Retention was measured for Ar, Ti, and Cr by ion induced x-ray emission and for Ta by backscattering of He ions. Range and sputtering parameters needed for model calculations were experimentally determined from Ta-implanted thin Fe film samples. Generally, at the low-fluence limit a near-cos θ dependence obtained while at the high-fluence limit a (cos θ)8/3 dependence applied where θ is the angle between the sample normal and the beam direction.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 27: Symposium E – Ion Implantation and Ion Beam Processing of Materials , 1983 , 615
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Singer, I.L. and Jeffries, R.A., these proceedings.Google Scholar
2. Schulz, F. and Wittmaack, K., Rad. Eff. 29, 31(1976).Google Scholar
3. Sigmund, P., Phys. Rev. 184, 383(1969).Google Scholar
4. Krautle, H., Nucl. Instrum. Methods 134, 167(1976).Google Scholar
5. Liau, Z.L. and Mayer, J.W. in: Treatise on Materials Science and Technology, Vol. 18, Ion Implantation, Hirvonen, J.K., ed. (Academic, New York 1980) ch. 2, pp. 17–50.Google Scholar