Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-25T17:52:05.417Z Has data issue: false hasContentIssue false
  • English
  • Français

Rapid Thermal Chemical Vapor Deposition of Polycrystalline Silicon-Germanium Films on SiO2 and Their Properties

Published online by Cambridge University Press:  15 February 2011

V. Z-Q Li ,
M. R. Mirabedini ,
R. T. Kuehn ,
D. Gladden ,
D. Batchelor ,
K. Christenson ,
J. J. Wortman ,
M. C. Ozturk  and
D. M. Maher
V. Z-Q Li
Affiliation:
North Carolina State University, Department of Electrical and Computer Engineering Box 7911, Raleigh, NC 27695-7911
M. R. Mirabedini
Affiliation:
North Carolina State University, Department of Electrical and Computer Engineering Box 7911, Raleigh, NC 27695-7911
R. T. Kuehn
Affiliation:
North Carolina State University, Department of Electrical and Computer Engineering Box 7911, Raleigh, NC 27695-7911
D. Gladden
Affiliation:
North Carolina State University, Department of Materials Science and Engineering Box 7907, Raleigh, NC, 27695-7907
D. Batchelor
Affiliation:
North Carolina State University, Department of Materials Science and Engineering Box 7907, Raleigh, NC, 27695-7907
K. Christenson
Affiliation:
North Carolina State University, Department of Materials Science and Engineering Box 7907, Raleigh, NC, 27695-7907
J. J. Wortman
Affiliation:
North Carolina State University, Department of Electrical and Computer Engineering Box 7911, Raleigh, NC 27695-7911
M. C. Ozturk
Affiliation:
North Carolina State University, Department of Electrical and Computer Engineering Box 7911, Raleigh, NC 27695-7911
D. M. Maher
Affiliation:
North Carolina State University, Department of Materials Science and Engineering Box 7907, Raleigh, NC, 27695-7907
Get access

Abstract

In this work, polycrystalline SiGe has been viewed as an alternative gate material to polysilicon in single wafer processing for the deep submicrometer VLSI applications. We studied deposition of the silicon-germanium (SiGe) films with different germanium concentrations (up to 85%) on SiO2 in a rapid thermal chemical vapor deposition reactor using GeH4 and SiH4/H2 gas mixture with the temperature ranging from 550°C to 625°C. Since the SiGe RTCVD process is selective toward oxide and does not form nucleation sites on the oxide easily, an in-situ polysilicon flash technique is used to provide the necessary nucleation sites for the deposition of SiGe films with high germanium content. It was observed that with the in-situ polysilicon flash as a pre-nucleation seed, the SiGe deposited on SiO2 forms a continuous polycrystalline layer. Polycrystalline SiGe films of about 2000Å in thickness have a columnar grain structure with a grain size of approximately 1000Å. Compositional analyses from Auger Electron Spectroscopy (AES) and Rutherford backscattering (RBS) show that the high germanium incorporation in the SiGe films has a weak dependence on the deposition temperature. It is also noted that the germanium content across the film thickness is fairly constant which is a critical factor for the application of SiGe films as the gate material. Lastly, we found that the surface morphology of SiGe films become smoother at lower deposition temperature.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 403: Symposium I – Polycrystalline Thin Films: Structure, Texture, Properties and Applications II , 1995 , 333
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Nayak, D. K., Woo, J. C. S., Park, J. S., Wang, K. and MacWilliams, K. P., IEEE Electron Device Lett., 12, 154 (1991).Google Scholar
2. King, T-J. and Saraswat, K. C., IEEE IEDM Tech. Digest, 567, Washington, DC (1991).Google Scholar
3. Guha, S., Yang, J., Banerjee, A., Glatfelter, T., Hoffman, K., Ovshinsky, S. R., Izu, M., Ovshinsky, H.C. and Deng, X., Abstracts of 1994 MRS Spring Meeting, 10, San Francisco (1994).Google Scholar
4. Ohtani, N., Mokler, S. M., Xie, M. H., Zhang, J. and Joyce, B. A., Appl. Phys. Lett., 62, 2042 (1993).Google Scholar
5. Kamins, T. I. and Meyer, D. J., Appl. Phys. Lett., 59, 178 (1991).Google Scholar
6. Tsai, J. A. and Reif, R., Appl. Phys. Lett., 66 (14), 1809 (1995).Google Scholar
7. Lin, H.C., Chang, C. Y., Chen, W. H., Tsai, W. C., Chang, T. C., Jung, T. G. and Lin, H. Y., J. Electrochem. Soc., 141 (9), 2559 (1994).Google Scholar
8. Cao, Min, Wang, Albert and Saraswat, Krishna C., J. Electrochem. Soc., 142 (5), 1566 (1995).Google Scholar
9. Zhong, Y., Ozturk, M. C., Grider, D. T., Wortman, J. J. and Littlejohn, M.A., Appl. Phys. Lett. 57 (20), 2092 (1990).Google Scholar
10. Ozturk, M. C., Grider, D. T., Wortman, J. J., Littlejohn, M. A., Zhong, Y., Batchelor, D., P. Russell, J. Electron. Mater., 19 (10), 1129 (1990).Google Scholar
11. Ren, Xiaowei, Ozturk, M. C. and Wortman, J. J., Zhang, Bojun, Maher, D. M. and Batchelor, Dale, J. Vac. Sci. Technol. B 10 (3), 1081 (1992).Google Scholar