Hostname: page-component-cd9895bd7-jn8rn Total loading time: 0 Render date: 2024-12-27T02:04:05.472Z Has data issue: false hasContentIssue false
  • English
  • Français

Proton Beam Nano-Machining: End Station Design and Testing

Published online by Cambridge University Press:  15 February 2011

J.A. van Kan ,
A.A. Bettiol  and
F. Watt
J.A. van Kan*
Affiliation:
Centre for Ion Beam Applications, Physics Department, National University of Singapore, Singapore117542
A.A. Bettiol
Affiliation:
Centre for Ion Beam Applications, Physics Department, National University of Singapore, Singapore117542
F. Watt
Affiliation:
Centre for Ion Beam Applications, Physics Department, National University of Singapore, Singapore117542
*
*Contact: [email protected]
Get access

Abstract

A new nuclear nanoprobe facility has been developed at the Centre for Ion Beam Applications (CIBA) in the Physics Department of the National University of Singapore. This facility is the first of its type dedicated to proton beam micromachining on a micron as well as a nano scale. The design and performance of the facility, which is optimized for 3D lithography with MeV protons, is discussed here. The system has been designed to be compatible with Si wafers up to 6”.

The production of good quality high aspect ratio microstructures requires a lithographic technique capable of producing microstructures with smooth vertical sidewalls. In proton beam micromachining, a high energy (e.g. 2 MeV) proton beam is focused to a sub-100 nm spot size and scanned over a resist material (e.g. SU-8 and polymethylmethacrylate (PMMA)). When a proton beam interacts with matter it follows an almost straight path, the depth of which is dependent on the proton beam energy. These features enable the production of nanometer sized polymer structures. Experiments have shown that post-bake and curing steps are not required in this SU-8 process, reducing the effects of cracking and internal stress in the resist. Since proton beam micromachining is a fast direct write lithographic technique it has high potential for the production of high-aspect-ratio nano-structures.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 777: Symposium A – Nanostructuring Materials with Energetic Beams , 2003 , T2.1
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

references

[1] Cerrina, F., in: Choudury, P. Rai (Ed.), Handbook of Microlithography, Micromachining and Microfabrication, vol. 1, Ch.3, SPIE Press Monograph PM39, pp. 251–319, 1997.Google Scholar
[2] Watt, F., Kan, J.A. van, Osipowicz, T., MRS Bulletin February, 33 (2000).Google Scholar
[3] Kan, J.A. van, Sanchez, J.L., Osipowicz, T. and Watt, F., Microsystem Technologies, 6, 82 (2000).Google Scholar
[4] Kan, J.A. van, Bettiol, A.A. and Watt, F, submitted to APL.Google Scholar
[5] Bettiol, A.A., Kan, J.A. van, Sum, T.C. and Watt, F., Nucl. Instr. and Meth. B, B181, 49 (2001).Google Scholar
[6] Kan, J.A. van, Sum, T.C., Osipowicz, T. and watt, F., Nucl. Instr. and Meth. B161-163, 366 (2000).Google Scholar
[7] Biersack, J. and Haggmark, L.G., Nucl. Instr. and Meth. 174, 257 (1980)Google Scholar
[8] Bogdanov, A.L. & Peredkov, S.S., http://www.maxlab.lu.se/beamlines/bld811.Google Scholar
[9] Springham, S.V., Osipowicz, T., Sanchez, J.L., Gan, L.H. and Watt, F., Nucl. Instr. and Meth. B130, 155 (1997)Google Scholar
[10] Watt, F., Rajta, I., Kan, JA van, Bettiol, AA, Osipowicz, T., Nucl. Instr. and Meth. B190, 306 (2002).Google Scholar
[11] Odom, T.W., Thalladi, V.R., Love, J. Christover & Whitesides, G.M., J AM Chem Soc 124, No 41, 12112 (2002)Google Scholar
[12] Watt, F., Kan, J.A. van, Rajta, I., Bettiol, A.A., Choo, T.F., Breese, M.B.H. and Osipowicz, T., In press Nucl. Instr. and Meth.Google Scholar