Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-11-19T03:12:08.011Z Has data issue: false hasContentIssue false

Properties of Zinc Oxide Doped Indium, Magnesium and Aluminum Oxide Films used on Flexible Substrates

Published online by Cambridge University Press:  01 February 2011

Shih Hsiu Hsiao
Affiliation:
[email protected], Kyoto University, Mechanical Engineering and Science, Yoshida Honmachi Sakyo-ku, Kyoto, 606-8501, Japan
Yoshikazu Tanaka
Affiliation:
[email protected], Kyoto University, Mechanical Engineering and Science, Kyoto, 606-8317, Japan
Ari Ide-Ektessabi
Affiliation:
[email protected], Kyoto University, Mechanical Engineering and Science, Kyoto, 606-8317, Japan
Get access

Abstract

Zinc oxide was considered to be substitute for indium tin oxide (ITO) as the transparent conductive oxide (TCO) films used in display industry according to indium is a rare and expensive metal. For the flexible display, the polymeric materials used as the flexible substrates are more bendable and lighter weight compared to the glass substrates used in flat panel display. However, the thermal sensitivity of polymer affects the properties of TCOs layers when it was deposited at room temperature. In this study, we doped the different ratio of indium oxide, magnesium oxide and aluminum oxide into zinc oxide to improve the properties of zinc oxide used as the TCOs films deposited by the sputtering method. The polyethylene terephthalate (PET) was used as the flexible substrate without thermal process and the glass was used as the comparison substrate with annealing. The light transmittance and the surface resistivity were measured. The chemical composition and the crystal structure were analyzed by using Rutherford backscattering spectrometry and X-ray diffraction measurement.

Type
Research Article
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Sieber, I., Wanderka, N., Urban, I., Dorfel, I., Schierhorn, E., Fenske, F., Fuhs, W., Thin Solid Films 330, 108113 (1998)10.1016/S0040-6090(98)00608-7Google Scholar
2. Matsubara, K., Tampo, H., Shibata, H., Yamada, A., Fons, P., Iwata, K., Niki, S., Apply. Phys. Letter, 85, 1374 (2004)Google Scholar
3. Lu, Y. F., Ni, H. Q., Mai, Z. H., Journal of Applied Physics 88, 1, 498502 (2000)10.1063/1.373685Google Scholar
4. Minemoto, T., Negami, T., Nishiwaki, S., Takakura, H., Hamakawa, Y., Thin Solid Films 372, 173 (2000)Google Scholar
5. Haacke, G.., Journal of Applied Physics 47, 9, 40864089 (1976)Google Scholar