No CrossRef data available.
Article contents
Properties of Pr-based high k dielectric films obtained by Metal-Organic Chemical Vapor Deposition
Published online by Cambridge University Press: 28 July 2011
Abstract
We report the results of a recent study on the deposition of praseodymium oxides thin films on silicon substrates by Metal-Organic Chemical Vapor Deposition (MOCVD). A suited Pr(III) β-diketonate precursor has been used as the metal source and the deposition conditions have been carefully selected because of a large variety of possible PrO2−x (x= 0−0.5) phases. Pr2O3 films have been obtained in a hot-wall MOCVD reactor under non oxidising ambient at 750°C deposition temperature. The structural and morphological characteristics of Pr2O3 films have been carried out by X-ray diffraction (XRD) and high resolution transmission electron microscopy (TEM). Chemical compositional studies have been performed by X- ray photoelectron spectroscopic (XPS) analysis and a fully understanding of the MOCVD process has been achieved. Preliminary electrical measurements point to MOCVD as a reliable growth technique to obtain good quality praseodymium oxide based films.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 2004