Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-23T18:22:50.989Z Has data issue: false hasContentIssue false
  • English
  • Français

Progress on the Fabrication and Characterization of High Efficiency Thermoelectric Generators

Published online by Cambridge University Press:  01 February 2011

Timothy P. Hogan ,
Adam D. Downey ,
Jarrod Short ,
Jonathan J. D'Angelo ,
Eric Quarez ,
John Androulakis ,
Pierre F. P. Poudeu ,
Mercouri G. Kanatzidis ,
Ed Timm  and
Kim Sarbo
...Show all authors
Timothy P. Hogan
Affiliation:
[email protected], Michigan State University, Electrical and Computer Engineering, 2120 Engineering Building, East Lansing, MI, 48824-1226, United States, (517) 432-3176, (517) 353-1980
Adam D. Downey
Affiliation:
[email protected], Michigan State University, Electrical and Computer Engineering Department, United States
Jarrod Short
Affiliation:
[email protected], Michigan State University, Electrical and Computer Engineering Department, United States
Jonathan J. D'Angelo
Affiliation:
[email protected], Michigan State University, Electrical and Computer Engineering Department, United States
Eric Quarez
Affiliation:
[email protected], Michigan State University, Chemistry Department, United States
John Androulakis
Affiliation:
[email protected], Michigan State University, Chemistry Department, United States
Pierre F. P. Poudeu
Affiliation:
[email protected], Michigan State University, Chemistry Department, United States
Mercouri G. Kanatzidis
Affiliation:
[email protected], Michigan State University, Chemistry Department, United States
Ed Timm
Affiliation:
[email protected], Michigan State University, Mechanical Engineering Department, United States
Kim Sarbo
Affiliation:
[email protected], Michigan State University, Mechanical Engineering Department, United States
Harold Schock
Affiliation:
[email protected], Michigan State University, Mechanical Engineering Department, United States
Get access

Abstract

High efficiency thermoelectric modules are of great interest for power generation applications where hot side temperatures of approximately 800K exist. The fabrication of such modules requires a multidisciplinary effort for the optimization of the material compositions, the engineering of the module systems, modeling and fabrication of the devices, and constant feedback from characterization. Pb-Sb-Ag-Te (LAST) and Pb-Sb-Ag-Sn-Te (LASTT) compounds are among the best known materials for this temperature range. Modeling of these materials and possible cascaded structures shows efficiencies of 14% can be achieved for low resistance contacts. Using antimony we have achieved contact resistivities less than 20 µΩ·cm2. Here we give a detailed presentation on the procedures used in the fabrication of thermoelectric generators based on these new materials. We also present the characterization systems and measurements on these generators.

Keywords

thermoelectricitynanoscaledevices
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 886: Symposium F – Materials and Technologies fore Direct Thermal-to-Electric Energy Conversion , 2005 , 0886-F12-04
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Harman, T. C., Walsh, M. P., LaForge, B. E., Turner, G. W., Journal of Electronic Materials, Vol. 34, No. 5, pp. L19–L22, 2005.Google Scholar
2. Hicks, L. D., Dresselhaus, M. S., Physical Review B, 47 (19), 12727–12731, 1993.Google Scholar
3. Venkatasubramanian, R., Siivola, E., Colpitts, T., O'Quinn, B., Nature, 413, p. 597–602, 2001.Google Scholar
4. Broido, D. A., Reinecke, T. L., Physical Review B, 64, 045324, 2001.Google Scholar
5. Hsu, K. F., Loo, S., Guo, F., Chen, W., Dyck, J. S., Uher, C., Hogan, T., Polychroniadis, E. K., Kanatzidis, M. G., Science, 303, pp. 818–821, 2004.Google Scholar
6. Lin, H., Bozin, E. S., Billinge, S. J. L., Quarez, E., Kanatzidis, M. G., Physical Review B, 72 (17): Art. No. 174113, 2005.Google Scholar
7. Kosuga, A., Uno, M., Kurosaki, K., Yamanaka, S., Journal of Alloys and Compounds, 391 (1–2), pp. 288–291, 2005.Google Scholar
8. Kanatzidis, M. G., “The Nanostructured Thermoelectric Materials AgPbmSbTe2+m (LAST-m),” presented in Symposium F, at the Fall 2005 Materials Research Society Conference, Boston, MA, 2005.Google Scholar
9. Downey, A. D., Timm, E., Poudeu, P. F. P., Kanatzidis, M. G., Shock, H., Hogan, T. P., “Application of Transmission Line Theory for Modeling of a Thermoelectric Module in Multiple Configurations for AC Electrical Measurements,” presented in Symposium F, at the Fall 2005 Materials Research Society Conference, Boston, MA, 2005.Google Scholar
10. Harman, T. C., Khan, J. H., Journal of Applied Physics, 30 (9), pp. 1351–1359, 1959.Google Scholar
11. Hogan, T. P., and Shih, T., “Modeling and Characterization of Power Generation Modules Based on Bulk Materials,” Chapter 12 in Thermoelectrics Handbook: Micro to Nano, edited by Rowe, D. M., Taylor and Francis, CRC Press, 2005.Google Scholar
12. D'Angelo, J., Short, J. L., Downey, A. D., Pajor, M. A., Timm, E., Schock, H., Chung, D.-Y., Kanatzidis, M. G., Hogan, T. P., “Investigation of Low Resistance Contacts to Pb-Sb-Ag-Te (LAST) Materials for Module Fabrication,” presented in Symposium F, at the Fall 2005 Materials Research Society Conference, Boston, MA, 2005.Google Scholar
13. Cobble, M. H., “Calculations of Generator Performance,” Chapter 39 in the CRC Handbook of Thermoelectrics, edited by Rowe, D. M., CRC Press, New York, 1995.Google Scholar