Hostname: page-component-6bf8c574d5-xtvcr Total loading time: 0 Render date: 2025-02-20T14:15:34.404Z Has data issue: false hasContentIssue false
  • English
  • Français

Production of Y‐Ba‐Cu‐0 Superconducting Thin Films by an Aerosol Chemical Vapor Deposition Process

Published online by Cambridge University Press:  28 February 2011

A. Driessen ,
Q. Tang ,
L. Hilderink  and
Th.J.A. Popma
A. Driessen
Affiliation:
University of Twente, Faculty of Applied Physics, P.O.Box 217, 7500 AE Enschede, The Netherlands
Q. Tang
Affiliation:
University of Twente, Faculty of Applied Physics, P.O.Box 217, 7500 AE Enschede, The Netherlands
L. Hilderink
Affiliation:
University of Twente, Faculty of Applied Physics, P.O.Box 217, 7500 AE Enschede, The Netherlands
Th.J.A. Popma
Affiliation:
University of Twente, Faculty of Applied Physics, P.O.Box 217, 7500 AE Enschede, The Netherlands
Get access

Abstract

Thin film production by aerosol deposition is a simple, non‐vacuum method, which under certain conditions of the process parameters, can be considered as a chemical vapor deposition (CVD) process. In this paper we describe the formation of superconducting thin films by aerosol deposition in the CVD regime by using metal‐organic precursors. The best results were obtained with the metal β‐diketonates of Y, Ba and Cu dissolved in butylacetate. This solution was nebulized and sprayed on a heated Si‐substrate with a Zr02‐buffer layer at a temperature of 450 C. After deposition a final heat treatment at a temperature of 800 C was applied. The resulting superconducting film has a Tc>2ero of 75 K.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 169: Symposium M – High Temperature Superconductors: Fundamental Properties and Novel Materials Processing , 1989 , 601
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Lambeck, P. V., Hilderlnk, L., Popma, Th.J.A., Proc. 3rd S&A Symposium, Enschede, 1986, p. 85.Google Scholar
2 Kawai, M., Kawai, T., Masuhira, H. and Takahasi, M., Jpn. J. Appl. Phys. 26, L1740 (1987)Google Scholar
3 Gupta, A., Koren, G., Gless, E.A., Moore, N.R., O'Sullivan, E.J.M. and Cooper, E.I., Appl. Phys. Letters 52, 163 (1988).Google Scholar
4 Langlet, M., Senet, E., Deschanvres, J.L., Delabouglise, G., Weiss, F. and Schubert, J.C., J. Less‐Comm. Met. 151, 399 (1989).Google Scholar
5 Vaslow, D.F., Dieckmann, G.H., Elli, D. Dawson, Ellis, A.B., Holmes, D.S., Lefkow, A., MacGregor, M., Nordman, J.E., Petras, M.F. and Yang, Y., Appl. Phys. Lett. 53, 324 (1988).Google Scholar
6 Spee, C. I.M.A. and Mackor, A., in Science and Technology of Thin Film Superconductors eds. McConnel, B. and Wolf, S., Plenum, New York 1989.Google Scholar
7 Viguie, J.C. and Spitz, J., J. Electrochem. Soc. 122, 585 (1975).Google Scholar
8Datasheet, Strem Chemicals, Inc.(1988).Google Scholar
9 Mogro‐Campero, A., Turner, L.G., Hall, E.L. and Burrell, M.C., Appl. Phys. Lett. 52, 2068 (1988).Google Scholar
10 Submltted by Dam, B. (Philips Company, Eindhoven, The Netherlands).Google Scholar