Hostname: page-component-cd9895bd7-dzt6s Total loading time: 0 Render date: 2024-12-27T02:40:55.606Z Has data issue: false hasContentIssue false
  • English
  • Français

Processing and Properties of Ceramic Nanocomposites Produced from Polymer Precursor Pyrolysis, High Pressure Sintering and Spark Plasma Sintering

Published online by Cambridge University Press:  14 March 2011

Julin Wan ,
Matt J. Gasch ,
Joshua D. Kuntz ,
Rajiv Mishra  and
Amiya K. Mukherjee
Julin Wan
Affiliation:
Department of Chemical Engineering and Materials Science, University of California Davis, CA 95616
Matt J. Gasch
Affiliation:
Department of Chemical Engineering and Materials Science, University of California Davis, CA 95616
Joshua D. Kuntz
Affiliation:
Department of Chemical Engineering and Materials Science, University of California Davis, CA 95616
Rajiv Mishra
Affiliation:
Department of Metallurgical Engineering, University of Missouri, Rolla, MO 65401
Amiya K. Mukherjee
Affiliation:
Department of Chemical Engineering and Materials Science, University of California Davis, CA 95616
Get access

Abstract

Silicon nitride/silicon carbide nanocomposites and alumina-based nanocomposites were investigated in an effort to produce materials with high structural integrity and service properties. Bulk nano-nano composites of silicon nitride and silicon carbide were processed by crystallization of amorphous Si-C-N ceramics that were consolidated in-situ during pyrolysis of a polymer precursor. This material was developed for the purpose of examining the creep behavior of covalent ceramics when there is no oxide glassy phase at grain boundaries. Si3N4/SiC micro-nano composites were sintered by spark plasma sintering (SPS), aiming at better microstructural control and improved creep resistance. Composites of alumina with diamond, silicon carbide and metal (Nb) were developed by high pressure sintering and SPS. These composites maintain microstructures with a nanometric alumina matrix and are targeted for studying the toughening mechanisms and superplastic deformation mechanisms.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 634: Symposium B – Structure and Mechanical Properties of Nanophase Materials-Theory & Computer Simulations vs. Experiment , 2000 , B7.2.1
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Gleiter, H., Nanostructured Materials: Basic Concepts and Microstructure, Acta Mater., 48, 1–29 (2000).Google Scholar
2 Jack, K. H., Nitrogen Ceramics for Engine Application, Nitrides and Oxynitrides, Proceedings of the Second International Symposium on Nitrides, ed. Hampshire, S. and Pomeroy, M. J. (Limerick, Ireland, 1998) pp. 255–262.Google Scholar
3 Hampshire, S., Nitride Ceramics, Materials Science and Technology: A Comprehensive Treatment, ed. Cahn, R. W., Haasen, P. and Kramer, E. J. (VCH, 1992) pp. 120–171.Google Scholar
4 Wakai, F., Kondo, N. and Shinoda, Y., Ceramics Superplasticity, Curr. Opinon in Solid St. and Mat. Sci., 4, 461–465 (1999).Google Scholar
5 Bill, J. and Aldinger, F., Precursor-Derived Covalent Ceramics, Precursor-Derived Ceramics, ed. Bill, J., Wakai, F. and Aldinger, F. (Wiley-VCH, 1999) pp. 33–51.Google Scholar
6 Riedel, R. and Dressler, W., Chemical Formation of Ceramics, Ceram. Inter., 22, 233–239 (1996).Google Scholar
7 Mishra, R. S., Schneider, J. A., Shackelford, J. F. and Mukherjee, A. K., Plasma Activated Sintering of Nanocrystalline γ.Al2O3 , NanoStructured Materials, 5, 525–544 (1995).Google Scholar
8 Nakano, K., Suzuki, T. S., Hiraga, K. and Sakka, Y., Superplastic Tensile Ductility Enhanced by Grain Size Refinement in a Zirconia-dispersed Alumina, Scripta Mater., 38, 33–38 (1998).Google Scholar
9 Wan, J., Gasch, M. J. and Mukherjee, A. K., Silicon Carbonitride Ceramics Produced by Pyrolysis of Polymer Ceramic Precursor, J. Mat. Res., 15, 1657–1660 (2000).Google Scholar