Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-23T16:38:35.689Z Has data issue: false hasContentIssue false
  • English
  • Français

Printed Organic Electronic Devices Made using High Volume Printing Processes

Published online by Cambridge University Press:  01 February 2011

Yu Xia ,
Anupama Karwa ,
Franz Sigg ,
Daniel M. Clark  and
Bruce E. Kahn
Yu Xia
Affiliation:
Center for Materials Science and Engineering, Rochester Institute of Technology, Rochester, NY 14623
Anupama Karwa
Affiliation:
Center for Materials Science and Engineering, Rochester Institute of Technology, Rochester, NY 14623
Franz Sigg
Affiliation:
School of Print Media, Rochester Institute of Technology, Rochester, NY 14623
Daniel M. Clark
Affiliation:
Printing Applications lab, Rochester Institute of Technology, Rochester, NY 14623
Bruce E. Kahn
Affiliation:
Imaging and Photographic Technology, Rochester Institute of Technology, Rochester, NY 14623 Center for Materials Science and Engineering, Rochester Institute of Technology, Rochester, NY 14623
Get access

Abstract

Printing is a promising technique to fabricate commercial organic electronic devices such as OLED, TFT, solar cells and sensors. In this investigation, we report the application of high volume flexographic printing, which makes low cost and batch production possible. Commercial RFID tags have been printed using metallic inks with organic compounds in the Printing Applications Lab (PAL) at Rochester Institute of Technology (RIT). Polyaniline ink was prepared and printed by flexography in the form of test targets and Interdigitated electrodes (IDE). The conductivity can be controlled by different levels of doping. Furthermore, multiple impression printing was used to print overlapping functional layers to obtain all printed organic electronic devices like chemical vapor and humidity sensors. Optical profilometry and SEM were used to analyze the surface and interface structure. Sensitivity was measured and compared with commercial devices.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 828: Symposium A – Semiconductor Materials for Sensing , 2004 , A5.28
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Sangoi, R.; Smith, C.G.; Seymour, M.D.; Venkataraman, J. N.; Clark, D.M.; Kleper, M.L.; Kahn, B.E.. J. Disp. Sci. Technol. 2004, 25(4), 513.Google Scholar
2. Sirringhaus, H., Science, 290, 2123, 2000 Google Scholar
3. Burns, , et. al., MRS Bull., Nov. 2003 Google Scholar
4. Rogers, J., Proc. Natl. Acad. Sci. (US), 98(9), 4835, 2001 Google Scholar
5. Michel, B., et. al., IBM J. Res. Dev., 45(5), 697, 2001 Google Scholar
6. Huang, W. S., Humphrey, B. D., MacDiarmid, A. G., J. Chem. Soc. Farady Trans. 1986, 82, 2385 Google Scholar
7. Kikas, T., Ishida, H., Janata, J., Anal. Chem. 2002, 74, 3605 Google Scholar
8. Janata, J., Josowicz, M., Nat. Mater. 2003, 2, 19 Google Scholar
9. Wallace, G. G., Smyth, M., Zhao, H., TrAC Trends Anal. Chem. 1999, 18, 245 Google Scholar
10. Kipphan, H., Handbook of Print Media Google Scholar
11. Jain, S., Chakane, S., etc., Sens. Actuators B, 96, 124, 2003 Google Scholar
12. Dickey, Elizabeth C., Varghese, Oomman K., Ong, Keat G., Gong, Dawei, Paulose, Maggie and Grimes, Craig A., Sensors, 2, 91, 2002 Google Scholar