Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-25T17:50:34.497Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation of pzt thin films on Pt/Ti/SiO2 and Pt/SiO2 Substrates by ECR Plasma Enhanced DC Magnetron Multi-target Reactive Sputtering

Published online by Cambridge University Press:  10 February 2011

Sung-Tae Kim ,
Hyun-Ho Kim ,
Moon-Yong Lee  and
Won-Jong Lee
Sung-Tae Kim
Affiliation:
Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, Taejon, South Korea
Hyun-Ho Kim
Affiliation:
Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, Taejon, South Korea
Moon-Yong Lee
Affiliation:
Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, Taejon, South Korea
Won-Jong Lee
Affiliation:
Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, Taejon, South Korea
Get access

Abstract

Perovskite-phase lead zirconate titanate (PZT) thin films were fabricated at 4751C by the electron cyclotron resonance (ECR) plasma enhanced DC magnetron multi-target reactive sputtering method on Pt/Ti/SiO2/Si and Pt/SiO2/Si substrates. Stoichiometric perovskite PZT films were readily obtained on Pt/Ti/SiO2/Si substrates because Ti atoms which were out-diffused to the Pt surface facilitated Pb incorporation by forming lead titanate at the early stage of deposition process. Activation of oxygen by ECR plasma facilitated the oxidation reaction and Pb incorporation into the film. Thus perovskite-phase PZT can be obtained on the Pt/SiO2/Si substrate.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 441: Thin Films – Structure and Morphology , 1996 , 205
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Kim, S. T., Kim, J. W., Jung, S. W., Shin, J. S., Ahn, S. T., and Lee, W. J., Mater. Chem. Phys. 45 (1995) 155–158.Google Scholar
2. Kim, S. T., Kim, H. H., Lee, M. Y., and Lee, W. J., Jpn. J. Appl. Phys. 36 (1997) 294–300.Google Scholar
3. Abe, K., Tomita, H., Toyoda, H., Imai, M. and Yokote, Y.: Jpn. J. Appl. Phys. 30 (1991) 2152–2154.Google Scholar
4. Hase, T., Sakuma, T., Amanuma, K., Mori, T., Ochi, A. and Miyasaka, Y.: Integrated Ferroelectrics. 8 (1995) 89–98.Google Scholar