Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-29T07:48:39.045Z Has data issue: false hasContentIssue false
  • English
  • Français

A Preliminary Study on Rice Husk Filled Polypropylene Composite

Published online by Cambridge University Press:  21 March 2011

Luyi Sun ,
Min -Xiao ,
Peng Xiao ,
Jianhua Song ,
Weixing Wang ,
Yafeng Zhang  and
Kecheng Gong
Luyi Sun
Affiliation:
Department of Chemistry, University of Alabama, Tuscaloosa, AL 35487, U.S.A. Polymer Structure & Modification Lab, South ChinaUniversity of Technology, Guangzhou, 510640, P. R. China
Min -Xiao
Affiliation:
Polymer Structure & Modification Lab, South China University of Technology, Guangzhou, 510640, P. R., China
Peng Xiao
Affiliation:
Polymer Structure & Modification Lab, South China University of Technology, Guangzhou, 510640, P. R., China
Jianhua Song
Affiliation:
Polymer Structure & Modification Lab, South China University of Technology, Guangzhou, 510640, P. R., China
Weixing Wang
Affiliation:
Polymer Structure & Modification Lab, South China University of Technology, Guangzhou, 510640, P. R., China
Yafeng Zhang
Affiliation:
Polymer Structure & Modification Lab, South China University of Technology, Guangzhou, 510640, P. R., China
Kecheng Gong
Affiliation:
Polymer Structure & Modification Lab, South China University of Technology, Guangzhou, 510640, P. R., China
Get access

Abstract

The major inorganic component of the rice husk (RH) is silica (∼20%)[1]. In the past, the utilization of RH mainly concentrated on the ash of the rice husk, such as using rice husk ash (RHA) as filler in plastics, especially in polypropylene (PP). In this work, RH was directly used as filler in PP. Some treatments were applied to the RH. PP composites of different filler loadings were compounded using a laboratory size two-roll mixer at a temperature of 180° C for a period of 5 minutes. The tensile strength of the RH-PP composites increased steadily with increasing filler loading until about 20% loading. The impact strength of the composites decreased with the increasing filler loading. Torques and melt index (MI) of composites with various filler loadings were investigated. The MI of the composite decreased with the increasing filler loading. RH showed more potential than RHA as PP filler.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 661: Symposium KK – Filled & Nanocomposite Polymer Materials , 2000 , KK5.14
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Rohatgi, Kalpana Prasd, S. V. and Rohatgi, P. K., J. Mater. Sci. Lett., 6, 829 (1987).Google Scholar
2. Fuad, M.Y. Ahmad, Mustafah Jamaludin, Z. A. Ishak, Mohd and Omar, A. K Mohd, Intern. J. Polymeric Mater., 19, 75 (1993).Google Scholar
3. Karera, A., Nargis, S., , Spatel and Patel, M., J. Sci. & Ind. Res, 45, 441 (1986).Google Scholar
4. Ahmad, M. Y. Fuad, M. J. Zaini, Z. A. Ishak, Mohd and Omar, A. K. Mohd, J. of Elastomers and Plast., 26, 252 (1994)Google Scholar
5. Fuad, M. Y. Ahmad, Shukor, Rahmad Ishak, Z. A. Mohd and Omar, A. K. Mohd, Plastics, Rubber and Composites Processing and Applications., 21, 225 (1994)Google Scholar
6. Fuad, M. Y. Ahmad, Ismail, Z. Mansor, M. S. Ishak, Z. A. Mohd and Omar, A. K. Mohd, Polym. J., 27, 1002 (1995).Google Scholar
7. Fuad, M. Y. A., Z., Ismail Ishak, Z. A. M. and Omar, A. K. M. Eur. Polym. J., 31, 885 (1995).Google Scholar
8. Fuad, M. Y. Ahmad, J., Mustafah Mansor, M. S. Ishak, Z. A. Mohd and Omar, A. K. Mohd, Polym. Intern., 38, 33 (1995).Google Scholar