Hostname: page-component-78c5997874-mlc7c Total loading time: 0 Render date: 2024-11-19T12:25:03.907Z Has data issue: false hasContentIssue false

Polycrystalline GeC Thin Films Deposited Using a Unique Hollow Cathode Sputtering Technique

Published online by Cambridge University Press:  01 February 2011

R. J. Soukup
Affiliation:
Department of Electrical Engineering, University of Nebraska-Lincoln, Lincoln, NE 68588-0511, USA
N. J. Ianno
Affiliation:
Department of Electrical Engineering, University of Nebraska-Lincoln, Lincoln, NE 68588-0511, USA
J. S. Schrader
Affiliation:
Department of Electrical Engineering, University of Nebraska-Lincoln, Lincoln, NE 68588-0511, USA
V. L. Dalal
Affiliation:
Department of Electrical and Computer Engineering, Iowa State University, Ames, IA 50011,USA
Get access

Abstract

Experimental results on thin films of the new material GexC1-x, deposited by a unique dual plasma hollow cathode sputtering technique are presented. The mostimportant contribution of this work is that it shows that by using non-equilibrium growth conditions resulting from the hollow cathode technique, one can grow Group IV materials which cannot otherwise be grown using normal CVD or MBE processes. The sputtering is accomplished by igniting a dc plasma in the Ar and H2 gases which are fed through Ge and C nozzles.

The GeC films are grown on etched Si (100), on Si with the native oxide and on glass. The films grown on glass were quite disordered, but the films grown on both types of Si substrates were very ordered in nature. This order has been characterized using Xray diffraction (XRD) and Raman spectroscopy.

Films with as much as 8% C have been deposited. In order to produce useful GexC1-x films, the C must bond to the Ge at lattice sites. Evidence of this desired GeC bond has been seen using Fourier Transform Infrared Spectroscopy (FTIR), Raman Spectroscopy, and XRD.

Type
Research Article
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Herrold, J. T., and Dalal, V. L., J. of Non-Cryst. Solids, 270, 255 (1999).10.1016/S0022-3093(00)00091-0Google Scholar
2 Herrold, J. T. and Dalal, V. L., Proc. of MRS 664 (2001), paper 25.12.Google Scholar
3 Pribil, G., Hubika, Z., Soukup, R. J., and Ianno, N. J., J. Vac. Sci. Technol. A19, 15711576 (2001).10.1116/1.1359537Google Scholar
4 Soukup, R. J., Ianno, N. J., Pribil, G. and Hubika, Z., Surface and Coatings Technol., 177-178, 676681 (2004).10.1016/j.surfcoat.2003.08.006Google Scholar
5 Soukup, R. J., Ianno, N. J., Darveau, S. A., and Exstrom, C. L., to be published in Solar Energy Materials and Solar Cells (Currently available on-line).Google Scholar
6 Soukup, R. J., Ianno, N. J., Schrader, J. S., Exstrom, C. L., Darveau, S. A., Udey, R. N. and Dalal, V. L., in review J. Appl. Phys.Google Scholar
7 Weber, W. H., Yang, B.-K. and Krishnamurthy, M., Appl. Phys. Lett. 73, 626 (1998).10.1063/1.121877Google Scholar
8 Hoffmann, L., Bach, J. C., Nielsen, B. Bech, Leary, P., Jones, R. and Öberg, S., Phys. Rev. B 55, 11 (1997).Google Scholar
9 Li, W., Shah, Ismat, Guerin, D., Chen, J. G. and Hwu, H., J. Vac. Sci. Technol. A19, 2617 (2001).10.1116/1.1397465Google Scholar
10 Tauc, J., Amorphous and Liquid Semiconductors, Plenum Press, London and New York, (1974), pp 175176.10.1007/978-1-4615-8705-7Google Scholar