Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-23T01:17:53.216Z Has data issue: false hasContentIssue false

Plastic Behaviour of Cu / Ni Multilayers

Published online by Cambridge University Press:  10 February 2011

M. Verdier
Affiliation:
Los Alamos Nal Lab., CMS, MS K765, Los Alamos, NM 87545.
M. Niewczas
Affiliation:
McMaster University, Dept of Materials Science and Engineering, Hamilton, ON, Canada.
J. D. Embury
Affiliation:
Los Alamos Nal Lab., CMS, MS K765, Los Alamos, NM 87545. McMaster University, Dept of Materials Science and Engineering, Hamilton, ON, Canada.
M. Hawley
Affiliation:
Los Alamos Nal Lab., CMS, MS K765, Los Alamos, NM 87545.
M. Nastasi
Affiliation:
Los Alamos Nal Lab., CMS, MS K765, Los Alamos, NM 87545.
H. Kung
Affiliation:
Los Alamos Nal Lab., CMS, MS K765, Los Alamos, NM 87545.
Get access

Abstract

In order to study the plasticity in Cu-Ni multilayers deposited on single crystals of Cu and etched Si, we have investigated the mechanical properties of the multilayers both by nanoindentation measurements, and by the transmission of well characterized dislocations from the underlying substrate by tensile deformation of Cu single crystals.

Various multilayers were deposited by physical vapor deposition with layer thicknesses varying between 1000 and 20 Angstroms (for a total thickness between 0.8 and 1 μm). Two types of experiments were designed. The first one aimed at injecting, in a controlled way, some dislocations from the substrate into the multilayers; the second type of experiment concerned the structure of the multilayer surface after having plastically pushed the material away from a nanoindenter.

This communication reports the results from the nanoindentation measurements, as well as the observations of slip on the surface. We observed through the injection of dislocations by nanoindentation that the multilayers increase in strength with refinement of the layer structure but at thicknesses below 35Å exhibits a softening behaviour. Also observation of the upheaval around the nanoindent showed an evolution from slip lines to more spread plasticity with refinement of the layer structure.

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Nastasi, M., Parkin, D. and Gleiter, H., “Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructures”, Kluwer, Dortrecht (1993).Google Scholar
[2] Schiotz, J., Ditolla, F. D., Jacobsen, K. W, Nature, 391(#6667) pp. 561563, (1998)Google Scholar
[3] Embury, J. D. and Hirth, J. P., Acta Met. et Mater., 42 ,p 2051–6 (1994)Google Scholar
[4] Nix, W. D., Met. Transactions A, 20A ,pp. 2217–45, (1989)Google Scholar
[5] Grihle, J. in “Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructures”, p 255286,Nastasi, M. et al. (eds), Kluwer, Dortrecht (1993).Google Scholar
[6] Was, G. S. and Foecke, T., Thin Solid Films, 286, p 1, (1996)Google Scholar
[7] Hashim, I., Park, B., Atwater, H. A., Appl. Phys. Lett., 63, p.2833 (1993)Google Scholar
[8] Misra, A., Verdier, M., Lu, Y. C., Kung, H., Mitchell, T. E., Nastasi, M. and Embury, J. D., accepted Scripta Mat.Google Scholar
[9] Liu, X. D., Magumo, N., Umemoto, M., Mat. Trans. JIM, 38, p 1033 (1997)Google Scholar
[10] Tench, D. M., White, J. T., J. Electrochem Soc., 138, p 3757 (1991)Google Scholar
[11] Oberle, R. R., Cammarata, R. C., Scripta Met. Mat., 32,p 583 (1995)Google Scholar
[12] Shull, A. L. and Spaepen, F., Jal of Applied Physics, 80 ,p 624356, (1996)Google Scholar
[13] Naik, R., Poli, A., McKague, D., Lukaszew, A. and Wenger, L.E., Phys. Rev. B, 51, p3549 (1995)Google Scholar