Hostname: page-component-cd9895bd7-p9bg8 Total loading time: 0 Render date: 2024-12-25T01:19:34.932Z Has data issue: false hasContentIssue false
  • English
  • Français

Photodegradation of Reactive Black 5 by Titanium Oxide Film Obtained with Ultrasonic Pyrolysis Technique

Published online by Cambridge University Press:  01 February 2011

R. T. Hernández L. ,
I. Hernández-Pérez ,
D. Y. Medina V. ,
N. Becerril  and
S. Soyuqui
R. T. Hernández L.
Affiliation:
Division of Basic Science and Engineering, Metropolitan Autonomous University, San Pablo 180, Azcapotzalco, México D.F., 02200, México. Email: [email protected]
I. Hernández-Pérez
Affiliation:
Division of Basic Science and Engineering, Metropolitan Autonomous University, San Pablo 180, Azcapotzalco, México D.F., 02200, México. Email: [email protected]
D. Y. Medina V.
Affiliation:
Division of Basic Science and Engineering, Metropolitan Autonomous University, San Pablo 180, Azcapotzalco, México D.F., 02200, México. Email: [email protected]
N. Becerril
Affiliation:
Division of Basic Science and Engineering, Metropolitan Autonomous University, San Pablo 180, Azcapotzalco, México D.F., 02200, México. Email: [email protected]
S. Soyuqui
Affiliation:
Division of Basic Science and Engineering, Metropolitan Autonomous University, San Pablo 180, Azcapotzalco, México D.F., 02200, México. Email: [email protected]
Get access

Abstract

The present work reports the photodegradation results of the Reactive Black 5 (RB5) izo dye by using titanium oxide films as photocatalysts. The films were obtained by ultrasonic spray pyrolysis deposit technique from a 0.0076 M of Ti(IV)-acetyl-acetonate and N, Ndimethylformamide solution over corning glasses as substrates. The film obtained by deposition at 450 °C for 6.0 min shows the best photocatalysis behavior, which may degrade 50% of 100 ppm RB5 in a period of 120 min, as monitored with a spectra-photometer UV-Vis between 190 to 900 nm. After 180 minutes of degradation, a 70% conversion could be obtained. These results are better than that obtained with TiO2 powders as photocatalyst.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1279: New Catalytic Materials , 2010 , 45
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Kaneko, M., Okura, I. Eds., “Photocatalysis Science and Technology”, (Springer, 2002)Google Scholar
2. Ramalho, R. S., “Wastewater Treatment”, (Academic Press Inc, 1983)Google Scholar
3. Srremany, M., Sen, S., Materials Res. Bull. 42 (2007) 177–189.Google Scholar
4. Mills, A., Hill, G., Bhopal, S., Perkin, I.P., O'Neill, , J. Photocherm. Phototobiol. A. Chem. 160 (2003) 185–192.Google Scholar
5. Hashimoto, K., Irie, H., Fujishima, A., Jpn., Soc. of Appl. Phys. 44, 12 (2005) 8269–8285.Google Scholar
6. Major, S., Banerjee, A., Chopra, K. L., Thin Solid Film 108 (1983) 333–342.Google Scholar
7. Parra, R. Suárez, Pérez, I. Hernández, Rincón, M. E., Ayala, S. López, Ahumada, M.C. Roldán, Solar Energy Materials & Solar Cells, 76 (2003) 189–199.Google Scholar