Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-25T18:03:38.896Z Has data issue: false hasContentIssue false
  • English
  • Français

Phase Transformations and Microstructural Development in Tial-Based Alloys

Published online by Cambridge University Press:  26 February 2011

P. A. Beaven ,
TH. Pfullmann ,
J. Rogalla  and
R. Wagner
P. A. Beaven
Affiliation:
GKSS-Research Centre GmbH, Institute for Materials Research, 2054 Geesthacht, Federal Republic of Germany
TH. Pfullmann
Affiliation:
GKSS-Research Centre GmbH, Institute for Materials Research, 2054 Geesthacht, Federal Republic of Germany
J. Rogalla
Affiliation:
GKSS-Research Centre GmbH, Institute for Materials Research, 2054 Geesthacht, Federal Republic of Germany
R. Wagner
Affiliation:
GKSS-Research Centre GmbH, Institute for Materials Research, 2054 Geesthacht, Federal Republic of Germany
Get access

Abstract

The main features of the phase transformations occurring in alloys based on Ti-48 at% Al are described in order to assess their roles in microstructural development during thermomechanical processing and subsequent heat treatment. It is shown that the presence of Al-rich interdendritic γ formed during solidification plays a critical role during these processes.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 213: Symposium Q – High-Temperature Ordered Intermetallic Alloys IV , 1990 , 151
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kim, Y.-W., Journal of Metals, 41, (1989), p. 24.Google Scholar
2. Valencia, J. J., McCullough, C., Levi, C. G. and Mehrabian, R., Scripta Metall. 21, (1987), p. 1341.Google Scholar
3. Huang, S.-C. and Hall, E. L., in “High Temperature Ordered Intermetallic Alloys III”, ed. Liu, C. T., Taub, A. I., Stoloff, N. S. and Koch, C.C., MRS, 133, (1989), p. 373.Google Scholar
4. Mishurda, J. C., Lin, J. C., Chang, Y. A. and Perepezko, J. H.,MRS, 133 , MRS, 133, (1989), p. 57 Google Scholar
5. Pfullmann, Th., Diploma Thesis, University of Hamburg, (1988).Google Scholar
6. Dogan, B., Wagner, R. and Beaven, P. A., submitted to Scripta Metall. et Mat.Google Scholar
7. Mohandas, E. and Beaven, P. A., submitted to Scripta Metall. et Mat.Google Scholar
8. Seeger, J., Klein, J. and Mecking, H., Prakt. Metall., 27, (1990), p. 236 CrossRefGoogle Scholar
9. Fukotomi, H., Hartig, Ch., and Mecking, H., Z. Metall., 81,(1990), p. 272 Google Scholar