Hostname: page-component-cd9895bd7-hc48f Total loading time: 0 Render date: 2024-12-23T08:42:57.694Z Has data issue: false hasContentIssue false
  • English
  • Français

Oxidation of Molybdenum Thin Films and its Impact on Molybdenum Field Emitter Arrays

Published online by Cambridge University Press:  17 March 2011

Babu R. Chalamala ,
Robert H. Reuss ,
Yi Wei ,
John M. Bernhard ,
Edward D. Sosa ,
David E. Golden ,
Sanjeev Aggarwal  and
R. Ramesh
Babu R. Chalamala
Affiliation:
Motorola, Inc., Semiconductor Products Sector, 2100 E. Elliot Road, Tempe, AZ 85284
Robert H. Reuss
Affiliation:
Motorola, Inc., Semiconductor Products Sector, 2100 E. Elliot Road, Tempe, AZ 85284
Yi Wei
Affiliation:
Motorola, Inc., Semiconductor Products Sector, 2100 E. Elliot Road, Tempe, AZ 85284
John M. Bernhard
Affiliation:
Department of Physics, University of North Texas, Denton, TX 75203
Edward D. Sosa
Affiliation:
Department of Physics, University of North Texas, Denton, TX 75203
David E. Golden
Affiliation:
Department of Physics, University of North Texas, Denton, TX 75203
Sanjeev Aggarwal
Affiliation:
Department of Material Science, University of Maryland, College Park, MD 20742
R. Ramesh
Affiliation:
Department of Material Science, University of Maryland, College Park, MD 20742
Get access

Abstract

Oxidation of emitter surfaces can be a serious problem for Mo field emitter arrays. We studied the oxidation and related changes in the electronic properties of Mo thin films as a function of annealing temperature. Experiments were done on Mo thin films prepared on Si and sodalime glass substrates. These films were thermally oxidized and characterized using a variety of techniques including x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and thermal desorption spectroscopy (TPD) methods. For films oxidized below 400°C, partial oxidation was observed, with MoO3(110) being the principal oxide phase. However, at a temperature of 500°C and above, oxidation of the film was complete. Electrical characteristics of the films undergo a rapid transition from semiconductive to highly insulating at temperatures between 475 to 500°C. Temperature programmed desorption spectra showed that the oxides are stable at elevated temperature with only a principal O2 desorption peak at approximately 786°C.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 685: Symposium D – Advanced Materials and Devices for Large-Area Electronics , 2001 , D14.2.1
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Brodie, I. and Schwoebel, P.R., Proc. IEEE 82, 1005 (1994).S.J. Kwon, K.J. Hong, J.D. Lee,Google Scholar
2. Oh, C.W., Yoo, J.S. and Kwon, Y.B., J. Vac. Sci. Technol. B18, 1227 (2000).Google Scholar
3. Wei, Y., Chalamala, B.R., Smith, B.G., and Penn, C.W., J. Vac. Sci. Technol. B17, 233 (1999).Google Scholar
4. Itoh, S., Niiyama, T., Yokoyama, M., J. Vac. Sci. Technol. B11, 647 (1993).Google Scholar
5. Chalamala, B.R., Uebelhoer, D., and Reuss, R.H., Rev. Sci. Instrum. 71, 320 (2000).Google Scholar
6. Archer, R.S., Chapter 16 in Rare Metals Handbook, Hampel, C.A., Ed., New York: Reinhold Pub. Corp., 1961.Google Scholar
7. For reference data for Mo and MoOx, refer to J. Phys. Chem. Ref. Data 14, 1509 (1985).Google Scholar
8. Choi, J.-G. and Thompson, L.T., Appl. Surf. Sci. 93, 143 (1996).Google Scholar
9. Reference data: Alfa Aesar Catalog, Johnson Matthey Co., p. 477 (1999).Google Scholar
10. Eastman, D.E., Phys. Rev. B2, 1 (1970).Google Scholar