Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-25T17:29:50.447Z Has data issue: false hasContentIssue false

Organofluorosilicate Glass (OFSG): A Dense Low K Dielectric with Superior Materials Properties

Published online by Cambridge University Press:  01 February 2011

M.L. O'Neill
Affiliation:
Electronics Technology, Air Products and Chemicals, Inc.;
Y.L. Cheng
Affiliation:
Taiwan Semiconductor Manufacturing Co., Ltd., Hsinchu, Taiwan, R.O.C.; Department of Materials Science and Engineering Natl.Chiao-Tung University, Hsin-Chu, Taiwan, R.O.C.;
A.S. Lukas
Affiliation:
Electronics Technology, Air Products and Chemicals, Inc.;
Y.L. Wang
Affiliation:
Taiwan Semiconductor Manufacturing Co., Ltd., Hsinchu, Taiwan, R.O.C.; Department of Electrical Engineering National Chi-Nan University, Nan-Tou, Taiwan, R.O.C.
E.J. Karwacki
Affiliation:
Electronics Technology, Air Products and Chemicals, Inc.;
M.S. Feng
Affiliation:
Department of Materials Science and Engineering Natl.Chiao-Tung University, Hsin-Chu, Taiwan, R.O.C.;
R.N. Vrtis
Affiliation:
Electronics Technology, Air Products and Chemicals, Inc.;
J.L. Vincent
Affiliation:
Electronics Technology, Air Products and Chemicals, Inc.;
B.K. Peterson
Affiliation:
Electronics Technology, Air Products and Chemicals, Inc.;
M.D. Bitner
Affiliation:
Electronics Technology, Air Products and Chemicals, Inc.;
Get access

Abstract

Organofluorosilicate glass (OFSG) films with the composition Si:O:C:H:F were deposited via plasma-enhanced CVD from mixtures of trimethylsilane (3MS), silicon tetrafluoride (SiF4), and oxygen (O2). OFSG films have significantly enhanced mechanical strength, thermo-oxidative stability, and adhesion compared with OSG films deposited from 3MS and O2 alone. We propose that the increased density of OFSG, which helps improve mechanical strength, is balanced by the presence on non-polarizable Si-F functionalities, which serve to lower the dielectric constant.

Type
Research Article
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Laxman, R., Low-k Dielectrics: CVD fluorinated silicon oxides. Semiconductor Int'l, 1995. May: p. 7174.Google Scholar
2. MacWilliams, K, et al., Low k material optimization. IEEE Proc., 2001: p. 203205.Google Scholar
3. Grill, A and Patel, V., Ultralow-k dielectrics by plasma-enhanced chemical vapor deposition. Appl. Phys. Lett., 2001. 79(6): p. 803805.Google Scholar
4. Wu, G, Gleason, K K., Plasma-enhanced chemical vapor deposition of low k dielectric films using methylsilane, dimethylsilane, and trimethylsilane precursors. J. Vac. Sci., A 21(2)Google Scholar
5. Pankov, V, Alonso, J.C., Ortiz, A, Analysis of Structural changes in plasma-deposited fluorinated silicon dioxide films caused by fluorine incorporation using ring-statistics based mechanism. J. Appl. Phys., 1999. 86(1): p. 275280 Google Scholar
6. Lubguban, J, et al., Thermal stability and breakdown strength of carbon-doped SiO2:F films prepared by plasma-enhanced chemical vapor deposition method. J. Appl. Phys., 2000. 87(8): p. 37153722.Google Scholar
7. Cheng, Y.L., O'Neill, M.L., et al, paper in progress.Google Scholar
8. Pankov, V, Alonso, J.C., Ortiz, A, Moisture stability and structural relaxation processes in plasma-deposited SiOF films. J. Vac. Sci Technol., A 17(6) Nov/Dec 1999: p. 31663171 Google Scholar