Hostname: page-component-cd9895bd7-hc48f Total loading time: 0 Render date: 2024-12-27T01:44:48.639Z Has data issue: false hasContentIssue false
  • English
  • Français

Optimization of Textured Photonic Crystal Backside Reflector for Si Thin Film Solar Cells

Published online by Cambridge University Press:  26 February 2011

Lirong Zeng ,
Peter Bermel ,
Yasha Yi ,
Ning-ning Feng ,
Bernard A. Alamariu ,
Ching-yin Hong ,
Xiaoman Duan ,
John Joannopoulos  and
Lionel C. Kimerling
Lirong Zeng
Affiliation:
[email protected], Massachusetts Institute of Technology, Materials Science and Engineering, Room 13-4138, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA, 02139, United States, 617-253-3157
Peter Bermel
Affiliation:
[email protected], Massachusetts Institute of Technology, Cambridge, MA, 02139, United States
Yasha Yi
Affiliation:
[email protected], Massachusetts Institute of Technology, Cambridge, MA, 02139, United States
Ning-ning Feng
Affiliation:
[email protected], Massachusetts Institute of Technology, Cambridge, MA, 02139, United States
Bernard A. Alamariu
Affiliation:
[email protected], Massachusetts Institute of Technology, Cambridge, MA, 02139, United States
Ching-yin Hong
Affiliation:
[email protected], Massachusetts Institute of Technology, Cambridge, MA, 02139, United States
Xiaoman Duan
Affiliation:
[email protected], Massachusetts Institute of Technology, Cambridge, MA, 02139, United States
John Joannopoulos
Affiliation:
[email protected], Massachusetts Institute of Technology, Cambridge, MA, 02139, United States
Lionel C. Kimerling
Affiliation:
[email protected], Massachusetts Institute of Technology, Cambridge, MA, 02139, United States
Get access

Abstract

A new backside reflector, textured photonic crystal, is introduced into Si thin film solar cells. Scattering matrix method is used to systematically optimize all the parameters of the two components of the backside reflector, grating and distributed Bragg reflector, to achieve the highest power conversion efficiency for a given solar cell thickness. Experimentally, Si-on-insulator solar cells are being fabricated to verify the tremendous efficiency enhancement and optimal design. It is found that while the optimal period and etch depth of the grating, the Bragg wavelength of the distributed Bragg reflector, as well as the antireflection coating thickness all decrease as the cell becomes thinner, the optimum duty cycle of the grating remains almost constant at 0.5. For a 2 μm thick cell, the relative efficiency enhancement can be as high as 52% using the optimized design.

Keywords

Sioptoelectronicabsorption
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 974: Symposium CC – Solar Energy Conversion , 2006 , 0974-CC02-06
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Hamakawa, Y. (Ed. ), Thin-Film Solar Cells, Next generation Photovoltaics and Its Applications, Springer, Berlin; New York, 2004.Google Scholar
2. Zeng, L., Yi, Y., Hong, C., Alamariu, B. A., Liu, J., Feng, N., Duan, X., and Kimerling, L. C., Appl Phys. Lett., 89, 111111 (2006).Google Scholar
3. ASTMG173–03, Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37 degree Tilted Surface (ASTM International, West Conshohocken, Pennsylvania, 2005).Google Scholar
4. Herzinger, C., Johs, B., McGahan, W., Woollam, J., and Paulson, W., J. Appl. Phys. 83, 3323 (1998).10.1063/1.367101Google Scholar
5. Auslender, M. and Hava, S., Optics Letters, 21, 1765 (1996); D. Whittaker and I. Culshaw, Phys Rev. B 60, 2610 (1999).Google Scholar
6. Henry, C. H., J. Appl. Phys., 51, 4494 (1980).10.1063/1.328272Google Scholar