Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-20T01:26:32.680Z Has data issue: false hasContentIssue false
  • English
  • Français

Optimization of Process Parameter and Temperature Uniformity On Wafers For Rapid Thermal Processing

Published online by Cambridge University Press:  15 February 2011

Andreas Tillmann
Andreas Tillmann*
Affiliation:
A.S.T. elektronik GmbH, Daimlerstr. 10, 89160 Dornstadt, Germany
Get access

Abstract

A new strategy based algorithm to optimize process parameter uniformity (e.g.sheet resistance, oxide thickness) and temperature uniformity on wafers in a commercially available Rapid Thermal Processing (RTP) system with independent lamp control is described. The computational algorithm uses an effective strategy to minimize the standard deviation of the considered parameter distribution. It is based on simulation software which is able to calculate the temperature and resulting parameter distribution on the wafer for a given lamp correction table. A cyclical variation of the correction values of all lamps is done while minimizing the standard deviation of the considered process parameter. After the input of experimentally obtained wafer maps the optimization can be done within a few minutes. This technique is an effective tool for the process engineer to use to quickly optimize the homogeneity of the RTP tool for particular process requirements. The methodology will be shown on the basis of three typical RTP applications (Rapid Thermal Oxidation, Titanium Silicidation and Implant Annealing). The impact of variations of correction values for single lamps on the resulting process uniformity for different applications will be discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 387: Symposium P – Rapid Thermal and Integrated Processing IV , 1995 , 3
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Kakoschke, R., Mater. Res. Soc. Symp., Proceedings, 224, 159 (1991)Google Scholar
2.. Cho, Y.M., Paulraj, A., Norman, S., Xu, G. and Kailrath, T., SPIE vol.1804, Rap. Th. And Las. Proc.,35, (1992)Google Scholar
3. Zöllner, J.-P., Ullrich, K., Petzoldt, J. and Eichhorn, G., Appl.Surf.Science, 69, 193 (1993)Google Scholar
4. Dilhac, J.M., Nolhier, N., 1 st Int. Rapid Thermal Processing Conference Fair, R.B. and Lojek, B. (eds.), Scottsdale, AZ, Sept., (1993), p. 12 Google Scholar
5. Riley, T.J. and Gyurcsik, R.S., Mater. Res. Soc. Symp., Proceedings, 303, 223, (1993)Google Scholar
6. Chatterjee, S., Edgar, T.F., Trachtenberg, I., 1st Int. Rapid Thermal Processing Conference, Fair, R.B. and Lojek, B. (eds.), Scottsdale, AZ, Sept., (1993), p.386Google Scholar
7. Toprac, A.J., Eyman, L.M., Elliot, J.K., 1st Int. Rapid Thermal Processing Conference, Fair, R.B. and Lojek, B. (eds.), Scottsdale, AZ, Sept., (1993), p. 399 Google Scholar
8. Nagabushnam, V., Singh, R.K., Mater. Res. Soc. Symp., Proceedings, 342, 383, (1994)Google Scholar
9. Sorrell, F.Y., Fordham, M.J., Yu, Seungil, Neto, A.J. Silva, Mater.Res.Soc.Symp., Proceedings, 342, 407, (1994)Google Scholar
10. Henda, R., Scheid, E., Bielle-Daspet, D., Mater. Res. Soc. Symp., Proceedings, 342, 419, (1994)Google Scholar
11. Belikov, S., Martynov, H., Kaplinsky, M., Manikopoulos, C., Ravindra, N., Kosonocky, W., 2nd Int. Rapid Thermal Processing Conference, Fair, R.B. and Lojek, B. (eds.), Monterrey, CA, Sept., (1994), p.120 Google Scholar
12. Spence, P.A., Winters, W.S.,Kee, R.J., Kermani, A., 2nd Int. Rapid Thermal Processing Conference, Fair, R.B. and Lojek, B. (eds.), Monterrey, CA, Sept., (1994), p. 139 Google Scholar
13. Knutson, K.L., Merchant, T.P., Cole, J.V., Hebb, J.P., Mihopoulos, T.G., Jensen, K.F., 2nd Int. Rapid Thermal Processing Conference, Fair, R.B. and Lojek, B. (eds.), Monterrey, CA, Sept., (1994), p. 146 Google Scholar
14. Tillmann, A., Mater.Res.Soc.Symp., Proceedings, 342, 376, (1994)Google Scholar
15. Tillmann, A., Cuchiaro, J., 2nd Int. Rapid Thermal Processing Conference, Fair, R.B. and Lojek, B. (eds.), Monterrey, CA, Sept., (1994),Google Scholar
16. Lassig, S.E., Debolske, T.J., Crowley, J.L., Mater. Res. Soc. Symp., Proceedings, 92, 103, (1987)Google Scholar