Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-25T18:00:46.396Z Has data issue: false hasContentIssue false
  • English
  • Français

Optical Properties of Microcavity Structures using the Organic Light Emitting Materials

Published online by Cambridge University Press:  14 March 2011

Boo Young Jung ,
Nam Young Kim ,
Chang Hee Lee ,
Chang Kwon Hwangbo  and
Chang Seoul
Boo Young Jung
Affiliation:
Department of Physics, Inha University, Inchon 402-751, Republic of Korea
Nam Young Kim
Affiliation:
Department of Physics, Inha University, Inchon 402-751, Republic of Korea
Chang Hee Lee
Affiliation:
Department of Physics, Inha University, Inchon 402-751, Republic of Korea
Chang Kwon Hwangbo
Affiliation:
Department of Physics, Inha University, Inchon 402-751, Republic of Korea
Chang Seoul
Affiliation:
Department of Textile Engineering, Inha University, Inchon 402-751, Republic of Korea
Get access

Abstract

We investigated the optical properties of Fabry-Perot microcavity with a tris(8- hydroxyquinoline)aluminum (Alq3) organic film by measuring the photoluminescence (PL) and transmittance. An Alq3 layer as an active layer was sandwiched between two mirrors, which were metal or (TiO2|SiO2) dielectric multilayer reflectors. An Alq3 layer on glass, [air|Alq3|glass], showed a PL peak around 513 nm and its full width half maximum (FWHM) was about 80 nm. Three types of microcavity, such as Type A [air|metal|Alq3|metal|glass], Type B [air|dielectric|Alq3|dielectric|glass], and Type C [air|metal|Alq3|dielectric|glass], were fabricated. The result shows that the FWHMs of three Fabry-Perot microcavities were reduced to 15∼27.5, 7∼10.5 and 16∼16.6 nm, respectively, and the microcavity structure is expected to improve the efficiency and tunability of emission spectrum in display.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 621: Symposia Q/R – Electron-Emissive Materials, Vacuum Microelectronics… , 2000 , Q3.5.1
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERANCES

[1] Tang, C. W. and VanSlyke, S. A., Appl. Phys. Lett., 51, 913 (1987).Google Scholar
[2] Dodabalapur, A., Rothberg, L. J., Jordan, R. H., Miller, T. M., Slusher, R. E., and Phillips, Julia M., J. Appl. Phys., 80, 6954 (1996).Google Scholar
[3] Fisher, T. A., Lidzey, D. G., Pate, M. A., Weaver, M. S., Whittaker, D. M., Skolnick, M. S., and Bradley, D. D. C., Appl. Phys. Lett., 67, 1355 (1995).Google Scholar
[4] Masenelli, B., Gagnaire, A., Berthelot, L., Tardy, J., and Joseph, J., J. Appl. Phys., 85, 3032 (1999).Google Scholar
[5] Becker, H., Burns, S. E., Tessler, N., and Friend, R. H., J. Appl. Phys., 81, 2825 (1997).Google Scholar
[6] Bulovic, V., Kozlov, V. G., Khalfin, V. B., and Forrest, S. R., Science. 279, 553 (1998).Google Scholar