Article contents
Optical and electrical properties of tin oxide-based thin films prepared by streaming process for electrodeless electrochemical deposition
Published online by Cambridge University Press: 09 June 2015
Abstract
Transparent conducting thin-films of SnO2: F were grown on preheated glass, Al2O3 coated glass, and quartz substrates by Streaming Process for Electrodeless Electrochemical Deposition (SPEED). Stannic chloride (SnCl4) and ammonium fluoride (NH4F) dissolved in a mixture of deionized water and organic solvents were used as precursors. The preheated substrate temperature was varied between 440 and 500 °C. High quality SnO2:F films were grown at all the substrate temperatures studied. The resulting typical film thickness was 250 nm. X-ray diffraction shows that the grown films are polycrystalline SnO2 with a tetragonal crystal structure. The average optical transmission of the films was around 93% throughout the wavelength range 400 to 1000 nm. The lowest electrical resistivity achieved was 6 × 10-4 Ω-cm. The Hall measurements showed that the film is an n-type semiconductor, with carrier mobility of 8.3 cm2/V-s, and carrier concentration of 1 × 1021 cm-3. The direct bandgap was determined to be 4.0 eV from the transmittance spectrum.
- Type
- Articles
- Information
- Copyright
- Copyright © Materials Research Society 2015
References
REFERENCES
- 2
- Cited by