Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-29T06:59:14.447Z Has data issue: false hasContentIssue false

Novel Wide-Band-Gap Ag(In1-xGax)Se2 Thin Film Solar Cells

Published online by Cambridge University Press:  01 February 2011

Tokio Nakada
Affiliation:
Department of Electrical Engineering and Electronics, Aoyama Gakuin University, Sagamihara, Kanagawa, 229-8558, JAPAN
Keiichiro Yamada
Affiliation:
Department of Electrical Engineering and Electronics, Aoyama Gakuin University, Sagamihara, Kanagawa, 229-8558, JAPAN
Ryota Arai
Affiliation:
Department of Electrical Engineering and Electronics, Aoyama Gakuin University, Sagamihara, Kanagawa, 229-8558, JAPAN
Hiroki Ishizaki
Affiliation:
Department of Electrical Engineering and Electronics, Aoyama Gakuin University, Sagamihara, Kanagawa, 229-8558, JAPAN
Naoomi Yamada
Affiliation:
Department of Electrical Engineering and Electronics, Aoyama Gakuin University, Sagamihara, Kanagawa, 229-8558, JAPAN
Get access

Abstract

Ag(In1-xGax)Se2 thin films have been deposited on Mo-coated soda-lime glass substrates by the three-stage process using a molecular beam epitaxy (MBE) system. We found a remarkable decrease in the substrate temperature during the 2nd stage in which the film composition changes to a Ag excess. A single phase chalcopyrite AIGS thin film with a slightly Ag poor composition was obtained by using the temperature monitoring composition method. The cell performance of the AIGS thin film solar cell was found to strongly depend on the Ga/(In+Ga) and Ag/(In+Ga) atomic ratios.

A high efficiency wide-gap (Eg=1.7eV) Ag(In0.2Ga0.8)Se2 thin film solar cell with a total-area efficiency of 9.3% (10.2% active area efficiency), Voc = 949mV, Jsc = 17.0 mA/cm2, FF = 0.577, and total area = 0.42 cm2 was achieved. The junction formation mechanism of AIGS devices is discussed based on electron beam induced current (EBIC) and scanning capacitance microscopy (SCM) analyses.

Type
Research Article
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Herberholtz, R. Nadnau, V., Ruhle, U., Koble, C., Schock, H. W., and Dimmler, B., Solar Energy Mat. Solar Cells 49, 227 (1997).Google Scholar
[2] Symko-Davies, M., Proc. 19th European Photovoltaic Solar Energy Conf., (Paris, 2005)pp.16511656.Google Scholar
[3] Moller, H. J., “Semiconductor for solar cells” (Artech House, 1993) pp-292.Google Scholar
[4] Satyanaarayana, Y. Murthy, O. Md Hussain, Naidu, B. Srinivasulu, Reddy, P Jayayama, Material Letters 10(11-12), 504 (1991).Google Scholar
[5] Ramesh, P. Paul, Hussain, O. M., Uthanna, S., Naidu, B. Srinivasulu, Reddy, P Jayayama, Material Letters 34, 217 (1998).Google Scholar
[6] Chandra, G. Hema, Hussain, O. M., Uthanna, S., Srinivasulu Naidu, B., Solid State Materials for Advanced Technology, B86(1), 60 (2001).Google Scholar
[7] Kohara, N., Negami, T., Nishitani, M., and Wada, T., Jpn. J. Appl. Phys. 43, L1141(1995).Google Scholar
[8] Ishizaki, H., Yamada, K., Arai, R., Kuromiya, K., Yamada, N., and Nakada, T., presented at this meeting, F5.12 (2005).Google Scholar
[9] Yamada, K. and Hoshino, N., and Nakada, T., Tech. Digest 14th Int. PVSEC, (Bangkok, January, 2004) pp. 571572.Google Scholar
[10] Matson, R. J.. Contreras, M. A, Tuttle, J. R., Swarzlander, A. B., Parilla, P. A., and Noufi, R., Mat. Res. Soc. Symp. Proc. Vol.426 (1996) pp-183188.Google Scholar