Hostname: page-component-cd9895bd7-q99xh Total loading time: 0 Render date: 2024-12-27T02:01:45.729Z Has data issue: false hasContentIssue false
  • English
  • Français

A novel method for the determination of optical properties of absorbing thin films with thickness variations

Published online by Cambridge University Press:  26 February 2011

Jonghoon Baek ,
Desiderio Kovar ,
John W. Keto  and
Michael F. Becker
Jonghoon Baek
Affiliation:
[email protected], The university of Texas at Austin, Electrical and Computer Engineering, 10300 Jollyville Rd #1222, Austin, TX, 78759, United States, 512-471-3202
Desiderio Kovar
Affiliation:
[email protected], The University of Texas at Austin, Mechanical Engineering, United States
John W. Keto
Affiliation:
[email protected], The University of Texas at Austin, Physics, United States
Michael F. Becker
Affiliation:
[email protected], The University of Texas at Austin, Electrical and Computer Engineering, United States
Get access

Abstract

Non-uniformity in the thickness of thin films can severely distort their transmission spectra as compared to those of flat, smooth films. Methods that extract properties such as refractive index, thickness, and extinction coefficient of such films can suffer inaccuracies when applied to wedged or rough films. In order to accurately extract optical properties of non-uniform films, we have developed a novel numerical method and efficient constitutive relations that can determine film properties from just the transmission spectrum. The Optimum Parameter Extraction (OPE) method can accommodate transparent or absorbing films thickness variations that result in significant errors in the values of refractive index and film thickness if not considered. A packing-density model was proposed and used for refractive index to accelerate the fitting routine and to avoid finding local minima instead of the global minimum. In this model, refractive index has one fitting parameter, the packing density, p. Therefore, the OPE method takes a shorter time and produces more accurate results than many other methods. We show that for actual PLD (Pulsed Laser Deposition) AlN thin films, properties such as refractive index, extinction coefficient, and film thickness were very accurately determined using our OPE method. These results are compared with two previous techniques to determine properties of thin films, and the accuracy and applicable conditions for all of these methods are discussed.

Keywords

optical propertiesfilmlaser ablation
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 894: Symposium LL – Combinatorial Methods and Informatics in Materials Science , 2005 , 0894-LL03-20
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Wang, L.-P., Shim, D. S., Ma, Q., Rao, V.R., Ginsburg, E., Talalyevsky, A., J. Vac, Sci. Technol. A 23, 1284 (2005).Google Scholar
2. Sancho-Parramon, J.; Modreanu, M.; Bassas, , J. Proceedings of SPIE-The International Society for Optical Engineering, 5826, 371(2005)Google Scholar
3. Tigau, N.; Ciupina, V.; Prodan, G., Journal of Crystal Growth 277, 529 (2005)Google Scholar
4. Joo, H.-Y., Kim, H.J., Kim, S.J., and Kim, S.Y., J. Vac. Sci. Technol. A 17, 862 (1999)Google Scholar
5. Swanepoel, R. J., Phys. E: Sci. Instrum. 17, 896 (1984).Google Scholar
6. Marquez, E., Ramirez-Malo., J.B. Fernandez-Pena, J., Villares, P., Jimenez-Garay, R., Ewen, P.J.S., and Owen, A.E., Optical Mater. 2, 143 (1993).Google Scholar
7. Swanepoel, R. J., Phys. E: Sci. Instrum. 16, 1214 (1983).Google Scholar
8. Jenkins, F. A. and White, H. E., Fundamentals of Optics (McGraw-Hill, Auckland, 1981), 482.Google Scholar
9. Titan, B., Appl. Opt. 23, 4477 (1984).Google Scholar
10. Forouhi, A. R. and Bloomer, I., Phys. Rev. B 34, 7018 (1986).Google Scholar
11. Ashcroft, N. W. and Mermin, N. D., “The Drude theory of Metals,” in Solid State Physics (Saunders, Fort worth, 1976), 16.Google Scholar
12. Fletcher, R., and Powell, M. J. D., Computer J. 6, 163 (1963).Google Scholar
13. Marquez, E., Gonzalez-Leal, J. M., Jimenez-Garay, R., Lukic, S. R., and Perovic, D.M., J. Phys. D: Appl. Phys. 30, 690 (1997).Google Scholar
14. Marquez, E., Bernal-Oliva, A.M., Gonzalez-Leal, J.M, Prieto-Alcon, R., Ledesma, A., Jimenez-Garay, R., and Martil, I., Mater. Chem. and Phys. 60, 231 (1999).Google Scholar