Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-25T17:33:47.263Z Has data issue: false hasContentIssue false
  • English
  • Français

Ni-Mo-Cr-B Alloys: Corrosion Resistant Amorphous Hardfacing Coatings

Published online by Cambridge University Press:  21 February 2011

S. K. Das ,
E. M. Norin  and
R. L. Bye
S. K. Das
Affiliation:
Allied Corporation, Materials Laboratory, Corporate R&D, P.O. Box 1021R, Morristown, N. J. 07960
E. M. Norin
Affiliation:
Metglas® Products, Allied Corporation.
R. L. Bye
Affiliation:
Allied Corporation, Materials Laboratory, Corporate R&D, P.O. Box 1021R, Morristown, N. J. 07960
Get access

Abstract

A series of rapidly solidified Ni-Mo-Cr-B alloys have been investigated for possible application as corrosion resistant hardfacing coatings. As-cast amorphous ribbons were pulverized to powder, which was subsequently applied to a substrate by plasma spraying. The coatings are substantially amorphous, as revealed by x-ray diffraction and transmission electron microscopy. They exhibit ∼95% of theoretical density and exhibit good corrosion and wear resistances, superior to those of many commercially available hardfacing coatings.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 28: Symposium F – Rapidly Solidified Metastable Materials , 1983 , 233
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Davis, L. A., et al. . in: “Metallic Glasses: Science and Technology,” Hargitai, C., et al. . eds. (Central Res. Inst. for Physics, Budapest, Hungary, 1981) V.1, p. 1.Google Scholar
2. Das, S. K., et al. . in “Rapid Solidification Processing, Principles and TIechnologies, III, Mehrabian, R., ed. (National Bureau of Standards, Gaithersburg, MD 1982) p. 559.Google Scholar
3. Johnson, A. M., et al. . in “Rapid Solidification Processing, Principles and TIechnologies, III, Mehrabian, R., ed. (National Bureau of Standards, Gaithersburg, MD 1982) p. 650.Google Scholar
4. Wan, C. C. in: “Rapidly Solidified Amorphous and Crystalline Alloys,” Kear, B. H., et al. ., eds. (Elsevier Science Publishing Co., Inc. N.Y. 1982) p. 441.Google Scholar