No CrossRef data available.
Article contents
Nickel Aluminide (Ni3Al) Fabricated By Reactive Infiltration
Published online by Cambridge University Press: 22 February 2011
Abstract
Nickel aluminide Ni3Al in single phase form, with grain size ∼ 10 μm, porosity ∼ 5%, tensile strength 425 MPa, modulus 92 GPa and ductility 9.5% at room temperature, was fabricated by reactive infiltration at 800˚C of liquid aluminum into a porous preform containing 78 vol.% nickel and made by sintering 3–7 μm size nickel particles.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 1995
References
1.
Lebrat, Jean-Pascal, Varma, Arvind and McGinn, Paul J., J. Mater. Res.
9(5), 1184–1192 (1994).Google Scholar
3.
Dunand, D.C., Somrner, J.L. and Mortensen, A., Metall. Trans. A
24A, 2161–2170 (1993).Google Scholar
5.
Chen, H.C., Kaya, M. and Smith, R.W., Adv. Prod. Fabr. Light Met. Met. Matrix Compos., Proc. Int. Symp., edited by Avedesian, Michael M., Larouche, Lucien J. and Masounave, Jacques, Can. Inst. Min. Metall. Pet.: Montreal, Can., 1992, p. 549–558.Google Scholar