Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-25T15:34:40.094Z Has data issue: false hasContentIssue false
  • English
  • Français

Neutron Diffraction Measurements of Strain and Texturre in Welded Zr 2.5 wt.Z Nb Tube

Published online by Cambridge University Press:  21 February 2011

T. M. Holden ,
R. R. Hosbons ,
J. H. Root  and
E. F. Ibrahim
T. M. Holden
Affiliation:
Atomic Energy of Canada Limited, Chalk River Nuclear Laboratories, Chalk River, Ontario, KOJ IJO, Canada
R. R. Hosbons
Affiliation:
Atomic Energy of Canada Limited, Chalk River Nuclear Laboratories, Chalk River, Ontario, KOJ IJO, Canada
J. H. Root
Affiliation:
Atomic Energy of Canada Limited, Chalk River Nuclear Laboratories, Chalk River, Ontario, KOJ IJO, Canada
E. F. Ibrahim
Affiliation:
Atomic Energy of Canada Limited, Chalk River Nuclear Laboratories, Chalk River, Ontario, KOJ IJO, Canada
Get access

Abstract

The axial and tangential components of residual strain have been measured through the region of an electron beam weld in Zr 2.5 wt.% Nb tube. Marked changes in grain orientation in the tube occur as far away as 10 mm from the weld-centre. In particular a large fraction of the grains which had an [0002] direction aligned tangentially in the original tube were reoriented with this direction aligned axially. These grains showed high (5 x 10-4) tensile strain. Compressive strains (-5 to - 10 x I0-4) were measured in the region 5 - 10 mm from the weld-centre in those grains with [1010] directioný aligned axially. The hoop straint vary from tensile (maximum 5 x 10-4) to compressive (maximum -5 x 10-4) as a function of distance from the weld centre.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 142: Symposium U – Nondestructive Monitoring of Materials Properties , 1988 , 59
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. MacEwen, S.R., Christodoulou, N., Tome, C., Jackman, J.A., Holden, T.M., Faber, J. Jr., and Hitterman, R.L.. Proceedings of the International Conference on the Texture of Materials (ICOTOM-8), edited by Kallend, J.S. and Gottstein, G. (The Metallurgical Society) 1988, p. 825.Google Scholar