Hostname: page-component-cd9895bd7-mkpzs Total loading time: 0 Render date: 2024-12-27T02:14:28.815Z Has data issue: false hasContentIssue false
  • English
  • Français

NDT-Techniques for Monitoring Material Degradation

Published online by Cambridge University Press:  21 February 2011

Paul Höller  and
Gerd Dobmann
Paul Höller
Affiliation:
Fraunhofer-Institut für zerstörungsfreie Prüfverfahren, Universität Geb.37, D-6600 Saarbrücken 11, Federal Republic of Germany
Gerd Dobmann
Affiliation:
Fraunhofer-Institut für zerstörungsfreie Prüfverfahren, Universität Geb.37, D-6600 Saarbrücken 11, Federal Republic of Germany
Get access

Abstract

The early detection of material degradation by NDT is of basic importance for safe and economic operation of many industrial components. Depending on the type of component as well as on service exposure conditions, NDT-techniques, which are sensitive to deformation, erosion, wear, porosity, microcracks and so on, are required. At present, only very few techniques are available for monitoring early stages of degradation. An overview of NDT-techniques already in use as well as under development in Germany for this problem is given. Special emphasis will be laid on the presentation of recent advances towards better detectability and objectivity.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 142: Symposium U – Nondestructive Monitoring of Materials Properties , 1988 , 105
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Dechema: Korrosion und Korrosionsschutz, ein Orientierungsrahmen für anwendungsbezogene Verbundforschung, Frankfurt, 1988 Google Scholar
[2] Lübbert, E., inZerstörungsfreie Prüfung im Bauwesen, edited by Schickert, G. and Schnitger, D. (Bundesanstalt für Materialprüfung, BAM, Berlin, 1986), introduction.Google Scholar
[3] Kappes, W., Neumann, R.K., Stanger, K.K., Höh, F.: Datenaufnahme und -ver-arbeitung bei der automatisierten Ultraschallprüfung mit dem ALOK-Verfahren. Tagungsband zum Seminar Automatisierung in der Ultra-schallprüfung, Stand der Technik und Entwicklungstendenzen bei mobiler Prüftechnik, Nov. 7–8, 1988, DGZfP/BAM, Berlin.Google Scholar
[4] Müller, , Schmitz, , Schäfer, : Recent Experiences in NDE of Reactor Pressure Vessels with LSAFT. 8th Intern. Conference on NDE in the Nuclear Industry, Nov. 17–20, 1986, Kissimmee, Florida.Google Scholar
[5] Maisl, M., Reiter, H., Höller, P.: Micro Radiography and Tomography for High Resolution NDT of Advanced Materials and Microstructural Components, to be published in Proceedings of ASME Winter Annual Meeting November 27-December 2, Chicago, IL.Google Scholar
[6] Green, R.E. Jr., Ruud, C.O.: Proceedings of Nondestructive Methods for Material Property Determination. April 6–8,1983, Hershey, Plenum Press New York, 1984.Google Scholar
[7] Bussière, J.F., Monchalin, J.P., Ruud, C.O., Green, R.E. Jr.: Proceedings of Nondestructive Characterization of Materials II. July 21–23, 1986, Montreal, Plenum Press, New York, 1987.Google Scholar
[8] Höller, P., Hauk, V.: Proceedings of Nondestructive Characterization of Materials III. October 3–6, 1986, Saarbrücken, Springer Verlag, Heidelberg, 1988/89 (to be published)Google Scholar
[9] Becker, R. and Betzold, K.: Computer aided design of eddy current weld inspection, optimization of a multifrequency approach. Proceedings of the International Conference on Improved Weldment control with Special Reference to Computer Technology, Vienna, 1988.Google Scholar
[10] Becker, R., Betzold, K., Dobmann, G. and Höller, P.: Progress in Defect Detection and Characterization with Multi-Multi-Frequency-Eddy-Current and Current Perturbation Testing. Proceedings of the 9th International Conference on NDE in the Nuclear Industry, Tokyo, 1988.Google Scholar
[11] Spauml;hn, H., in Werkstoffkunde Eisen und Stahl, Teil I, Bd. 2 (Verlag Stahleisen, Düsseldorf, 1983), p. 648.Google Scholar
[12] Dobmann, G., Theiner, W.A. and Becker, R. in Proceedings of Nondestructive Characterization of Materials III, Oct. 3–6, 1986, Springer Verlag, Heidelberg, 1988/89 (to be published).Google Scholar
[13] Altpeter, I., internal IzfP-report EM-IV-6.7, 1984.Google Scholar
[14] Theiner, W.A., Reimringer, B., Kopp, H. in Proceedings of Nondestructive Characterization of Materials III, Oct. 3–6, 1988, Saarbrücken, Springer Verlag, Heidelberg, 1988/89 (to be published).Google Scholar
[15] Kronmüller, H. in Seeger, A.: Moderne Probleme der Metallphysik, Springer Verlag, Heidelberg, 1966.Google Scholar
[16] Dobmann, G., Pitsch, H. in Proceedings of Nondestructive Characterization of Materials III, Oct. 3–6, 1988, Saarbrücken, Springer Verlag, Heidelberg, 1988/89 (to be published).Google Scholar