Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-20T07:41:54.064Z Has data issue: false hasContentIssue false
  • English
  • Français

Nanostructured powders: a new class of materials for forming high performance particulate coatings

Published online by Cambridge University Press:  10 February 2011

Ganesh Skandan
Ganesh Skandan*
Affiliation:
Nanopowder Enterprises Inc., 120 Centennial Ave., Piscataway, NJ 08854-3908
Get access

Abstract

Nanostructured powders, with particle sizes in the range 1 to 100 nm, have shown great promise in the forming of advanced films and coatings for a variety of applications including tribological, high surface area supports for catalysts, chemical gas sensors, and optoelectronics. This paper is a summary of two major classes of powder synthesis techniques: (1) precipitation from aqueous salt solutions, and (2) condensation from vapor phase. The solution approach leads to powder particles that are spherical shells consisting of nanograins. The powder is milled with melting point lowering compounds and reagglomerated to make it suitable for thermal spraying. In contrast, the vapor condensation approach yields powder particles that are discrete, and loosely agglomerated. In a variation of the process, the heated clusters or nanoparticles are allowed to sinter on a heated substrate, forming porous or dense coatings. Films/coatings with thicknesses between 0.5 μm and 20.0 μm at rates in excess of 1 μm/min. are formed by the in situ deposition process. The synthesis techniques, powder and coating characteristics, and applications of the technologies, are described in this paper.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 501: Symposium FF – Surface Controlled Nanoscale Materials for High-Added… , 1997 , 351
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Birringer, R., Herr, U., Gleiter, H., Trans. of Japan Inst. of Metals, 27, 43 (1986).Google Scholar
2. Hahn, H., Eastman, J., Siegel, R., Supp. to Cer. Trans., 1, B, 1115 (1988).Google Scholar
3. Gleiter, H., Progress in Mat. Sci., 33, 4 (1990).Google Scholar
4. Siegel, R. W., Nanostructured Materials, 3, No. 1, 1 (1993).Google Scholar
5. Gleiter, H., Nanostructured Materials, 1, No. 1, 1 (1992).Google Scholar
6. Skandan, G., Hahn, H., Roddy, M. and Cannon, W. R., J. Am. Ceram. Soc., 77, [7], 1706 (1994).Google Scholar
7. Robb, J. and Simpson, L., Drug and Cosmetic Industry, 3, 32 (1994).Google Scholar
8. McCandlish, L. E., Kear, B. H. and Kim, B. K., Nanostructured Materials, 1, No. 2, 119 (1992).Google Scholar
9. Yamazoe, N., Sensors and Actuators B5, 7 (1991).Google Scholar
10. Tompa, G. S., Morton, D. C., Sywe, B. S., Lu, Y., Forsythe, E. W., Ott, J. A., Smith, D., Khurgin, J. and Khan, B. A., MRS Symp. Proc., vol.358, 701 (1995).Google Scholar
11. Lee, S., Li, S., Choi, S. U. S., and Eastman, J., submitted to J. of Heat Transfer.Google Scholar
12. Li, S., Choi, S. U. S., and Eastman, J., submitted to J. Heat Transfer.Google Scholar
13. Gaertner, G. F. and Lydtin, H., Nanostructured Materials, 4, No. 5, 559 (1994).Google Scholar
14. Vollath, D., 2nd Int. Bus. Conf. on NanoMatenials and Coatings, org. by Gorham-Intertech (1995).Google Scholar
15. Gallaghar, D., Heady, W., Racy, J., Bhargava, R., J. Mat. Res., vol.10, 4, 870 (1994).Google Scholar
16. Messing, G., Zhang, S. and Jayanthi, V., J. Am. Ceram. Soc., 76, 11, 2707 (1993).Google Scholar
17. Taylor, P. and Pirzada, S., Proc. of the 1st Int. Business Conference on Nano-particulates, org. by Gorham-Intertech (1994).Google Scholar
18. Mosser, William, Geurts, B. and Sunstrom, J. IV, Proc. of 1st Int. Business Conference on Nanoparticulates, org. by Gorham-Intertech (1994).Google Scholar
19. Chang, W., Skandan, G., Hahn, H., Danforth, S. C. and Kear, B. H., Nanostructured Mat., 4, 345 (1994).Google Scholar
20. Skandan, G., Chen, Y-J., Glumac, N. and Kear, B. H., submitted to Powder Technology.Google Scholar
21. Skandan, G., Glumac, N., Chen, Y-J., Cosandey, F., Heims, E., and Kear, B., I. of Am. Ceram. Soc. (in press).Google Scholar
22. Sadangi, R. K., Kear, B. H. and McCandlish, L. E., MRS Proc., 351, 219 (1994).Google Scholar
23. Sadangi, R. K., Kear, B. H. and McCandlish, L. E., Nanostructured Materials, 3, 69 (1993).Google Scholar
24. Sadangi, R. K., Skandan, G. and Kear, B. H., to be published.Google Scholar
25. Sadangi, R. K., Skandan, G. and Kear, B. H., to be published.Google Scholar
26. Kear, B. H., Chang, W., Skandan, G., Kan, K., Danforth, S. C. and Hahn, H., TMS proceedings on Novel Techniques in Synthesis and Processing of Advanced Materials, ed. by Singh, J. and Copley, S. M., 261 (1995).Google Scholar
27. Chen, Y., Glumac, N., Skandan, G. and Kear, B. H., Nanostructured Materials, 9, 101 (1997).Google Scholar
28. Chen, Y., Glumac, N., Skandan, G. and Kear, B. H., Materials Letters (in press).Google Scholar
29. Lindackers, D., Strecker, M. G. D. and Roth, P., Nanostructured Materials, 4, 545 (1994).Google Scholar
30. Glumac, N., Chen, Y-J. and Skandan, G., J. of Mat. Res. (in press).Google Scholar
31. Gluamc, N. and Chen, Y-J., Laser Applications in Chemical and Environmental Analysis Conf., Optical Soc. Of Am. (1996).Google Scholar
32. Chung, S. L. and Katz, J. L., Combustion and Flame 61, 271 (1985).Google Scholar
33. Xing, Y., Koylu, U. O., and Rosner, D. E., Combust. Flame 107, 85 (1996).Google Scholar
34. Chung, S-L., Tsai, M-S., and Lin, H-D., Combust. Flame 85, 134 (1991).Google Scholar
35. Katz, J. L., and Hung, C-H., Combust. Sci. and Tech. 82, 169 (1992).Google Scholar
36. Shukla, V. I., Skandan, G. and Glumac, N., to be submitted.Google Scholar
37. Skandan, G., Glumac, N., Chen, Y-J., Cosandey, F. and Kear, B. H., Proc. of the Conference on Fine Powder Processing at PennState Univ., Aug '97 (in press).Google Scholar
38. Kingery, W. D., Intro. to Ceram., 2nd edition.Google Scholar
39. Mien, A., Krueger, S., Skandan, G., Long, G. G., Kerch, H., Hahn, H. and Parker, J. C., J. of Am. Ceram. Soc., 79 [5], 1201 (1996).Google Scholar