Hostname: page-component-cd9895bd7-q99xh Total loading time: 0 Render date: 2024-12-27T01:31:43.306Z Has data issue: false hasContentIssue false
  • English
  • Français

Nanostructured Ceramic Oxides Containing Ferrite Nanoparticles and Produced by Mechanical Milling.

Published online by Cambridge University Press:  01 March 2013

A. Huerta-Ricardo ,
K. Tsuchiya ,
T. Umemoto  and
H. A. Calderon
A. Huerta-Ricardo
Affiliation:
Departamento de Física, ESFM-IPN, UPALM Ed. 9, Zacatenco D.F. Mexico.
K. Tsuchiya
Affiliation:
Dept. Prod. Systems Eng., Toyohashi University of Technology, Toyohashi Aichi 441 Japan.
T. Umemoto
Affiliation:
Dept. Prod. Systems Eng., Toyohashi University of Technology, Toyohashi Aichi 441 Japan.
H. A. Calderon
Affiliation:
Departamento de Física, ESFM-IPN, UPALM Ed. 9, Zacatenco D.F. Mexico.
Get access

Abstract

This investigation deals with the production process and the characterization of ceramic materials consisting of magnetic particles in an insulating matrix. Composites made of magnetite particles (Fe3O4 or MgFe2O4) in a wüstite or magnesiowüstite matrix (FexO or Mg1-xFexO), respectively, have been produced by means of mechanical milling and spark plasma sintering. As-milled powders have a nanocrystalline structure in both systems. As a function of milling time, low energy milling gives rise to an increasingly higher volume fraction of wüstite in the FexO-Fe3O4 system while it promotes increasing amounts of magnesiowüstite (MgxFe1-xO). Sintering is performed from 673 to 1273 K in vacuum. Sintering at low temperatures allows retention of nanosized grains containing a fine dispersion of magnetic particles in a wüstite and magnesiowüstite matrix. Measurement of magnetic properties reflects the constitution of the sintered samples and the effect of grain size. It also allows determination of the transformation sequence both during mechanical milling and sintering

Keywords

Ceramicnanostructuresynthesis
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1485: Symposium 7D – Advanced Structural Materials—2012 , 2012 , pp. 71 - 76
Copyright
Copyright © Materials Research Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Yamaguchi, I., Manabe, T., Kumagai, T., Kondo, W. and Mizuta, S.. J. Mater. Res. 13 (1998) 935.CrossRefGoogle Scholar
Groves, G. W. and Fine, M. E., “Solid Solution and Precipitation Hardening in Mg-Fe-O Alloys”, J. Appl. Phys. 35 (1964) 3587.CrossRefGoogle Scholar
Pandey, R., Gale, J. D., Sampath, S.K. and Recio, J. M., “Atomistic Simulation Study of Spinel Oxides: Zinc Aluminate and Zinc Gallate” J. Am. Ceram. Soc. 82 (1999) 3337.CrossRefGoogle Scholar
O’Handley, R. C.. Modern Magnetic Materials. John Wiley &Sons, Inc. (1999) 432.Google Scholar
Lupis, C.H.P., Chemical Thermodynamics of Materials, Prentice-Hall Inc. A Simon and Schuster Company, Englewood Cliffs, New Jersey, (1983).Google Scholar