Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-29T07:23:55.072Z Has data issue: false hasContentIssue false
  • English
  • Français

Morphology Of Silicon Oxides On Silicon Carbide

Published online by Cambridge University Press:  10 February 2011

M. L. O‘Brien ,
S. Pejdo  and
R. J. Nemanich
M. L. O‘Brien
Affiliation:
Department of Physics, North Carolina State University, Raleigh, NC 27695
S. Pejdo
Affiliation:
Dept. of Electrical Engineering, North Carolina State University, Raleigh, NC 27695
R. J. Nemanich
Affiliation:
Department of Physics, North Carolina State University, Raleigh, NC 27695
Get access

Abstract

The development of high power devices based on silicon carbide requires a more complete understanding of the oxide formation process and interface characteristics. By using an integrated UHV system, samples were cleaned and oxides deposited in situ. The approach of the oxide formation process was to form the initial insulator, a few angstroms thick, and then deposit an oxide. Various deposition techniques are used in the oxide growth process; both thermal and plasma enhanced chemical vapor deposition were employed with two different precursors (oxygen and nitrous oxide), and the results were compared with thermal oxidation. The morphology of each of the deposited oxides was compared to the bare substrate and the thermal oxide wafers. This study focuses on the morphology of the different deposition processes using AFM. Examination of the morphology of the initial insulator growth process and the oxide deposition process gives insight into the physical characteristics of the silicon dioxide deposited on silicon carbide. The RMS values of the initial insulator formation and the control wafers are 0.93 and 0.95 nm respectively. Meanwhile, the RMS values for PECVD (200–400°C) and thermal CVD (400–600°C for oxygen-silane and 800–1000°C for nitrous oxide-silane) range from 1.43 to 1.93 nm.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 483: Symposium E – Power Semiconductor Materials & Devices , 1997 , 437
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Palmour, J. W., Davis, R. F., Kong, H. S., Corcoran, S. F., and Griffis, D. P., J. Electrochem. Soc., 136, 502–507 (1989)Google Scholar
2. Zetterling, C. and Ostling, M., Mat. Res. Soc. Symp. Proc. Vol.339, 209–214 10.1557/PROC-339-209Google Scholar
3. Kern, W. and Puotinen, D. A., RCA Rev., 31, 187–206, 1970Google Scholar
4. Kern, W., Overview and Evolution of Semiconductor Wafer Contamination and Cleaning Technology, in Handbook of Semiconductor Wafer Cleaning Technology, ed. By Kern, W. (Noyes Publication, NJ), 3–23, 1993 Google Scholar
5. Montgomery, J. S., Schneider, T. P., Barnak, J.P., Chen, Y. L., Hauser, J. R., and Nemanich, R. J., Appl. Phys. Lett. 67 (15), Oct. 9, 2194–96 (1995)Google Scholar
6. Lucovsky, G., Tsu, D. V., Rudder, R. A., and Markunas, R. J., Formation of Inorganic Films by Remote Plasma-Enhanced Chemical Vapor Deposition, in Thin Films Processes II, ed. By Vossen, J. L. and Kern, W. (Academic Press, San Diego), 565–619, 1991 Google Scholar
7. Jensen, K. F. and Kern, W., Thermal Chemical Vapor Deposition, in Thin Films Processes II, Ed. By Vossen, J. L. and Kern, W. (Academic Press, San Diego), 283–367, 1991 Google Scholar
8. Lipkin, L. and Palmour, J., J. Elect. Mater., Vol.25, No. 5, 909–915, 1996 Google Scholar