Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-11-19T06:33:10.873Z Has data issue: false hasContentIssue false
  • English
  • Français

Morphology change of γ′ precipitates in γ/γ′ two-phase microstructure in Co-based superalloys by higher-order alloying

Published online by Cambridge University Press:  04 February 2011

Katsushi Tanaka ,
Masahiro Ooshima ,
Norihiko L. Okamoto ,
Kyosuke Kishida  and
Haruyuki Inui
Katsushi Tanaka
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606-8501, Japan
Masahiro Ooshima
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606-8501, Japan
Norihiko L. Okamoto
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606-8501, Japan
Kyosuke Kishida
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606-8501, Japan
Haruyuki Inui
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606-8501, Japan
Get access

Abstract

Changes in the morphology of γ′ precipitates in a γ/γ′ two-phase microstructure in Co-based superalloys, which occur through higher-order alloying, have been investigated. The shape of γ′ precipitates changes from a cuboid to an irregularly rounded shape when the Ta content increases to 4 at.%. The irregular shape of the γ′ precipitates changes to cuboid again upon further alloying with 2 at.% Mo. Changes in the morphology of γ′ precipitates are closely related to variations in the lattice misfit between γ and γ′ phases upon alloying. A lattice misfit increases with an increase in Ta content, which makes γ/γ′ interfaces incoherent when the lattice misfit exceeds a critical value. On the contrary, the lattice misfit decreases upon alloying with Mo. Changes in the lattice misfit upon alloying are well explained through the partition behavior of alloying elements and their atomic volume.

Keywords

Comicrostructurealloy
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1295: Symposium N – Intermetallic-Based Alloys for Structural and Functional Applications , 2011 , mrsf10-1295-n08-06
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Sato, J., Omori, T., Oikawa, K., Ohnuma, I., Kainuma, R. and Ishida, K., Science 312, 90 (2006).Google Scholar
2. Osaki, M., Ueta, S., Shimizu, T., Omori, T. and Ishida, K., Electric Furnace Steel 79, 197 (2008).Google Scholar
3. Suzuki, A., DeNolf, G.C. and Pollock, T.M., Scr. Mater. 56, 385 (2007).Google Scholar
4. Suzuki, A. and Pollock, T.M., Acta Mater. 56, 1288 (2008).Google Scholar
5. Miura, S., Ohkubo, K. and Mohri, T., Mater. Trans. 48, 2403 (2007).Google Scholar
6. Tanaka, K., Ohashi, T., Kishida, K. and Inui, H., Appl. Phys. Lett. 91, 181907 (2007).Google Scholar
7. Ooshima, M., Tanaka, K., Okamoto, N.L., Kishida, K. and Inui, H., J. Alloys Comp. 508, 71 (2010).Google Scholar
8. Shinagawa, K., Omori, T., Sato, J., Oikawa, K., Onuma, I., Kainuma, R. and Ishida, K., Mater. Trans. 49, 1474 (2008).Google Scholar
9. Kobayashi, S., Tsukamoto, Y., Takasugi, T., Chinen, H., Omori, T., Ishida, K. and Zaefferer, S., Intermetallics 17, 1085 (2009).Google Scholar