Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-29T07:52:55.954Z Has data issue: false hasContentIssue false
  • English
  • Français

Modification of Wetting Property of Polycarbonate by Means of Ion Beam Implantation and Storage in Different Gas Environments

Published online by Cambridge University Press:  10 February 2011

A. Poirier ,
G. G. Ross ,
P. Bertrand  and
V. Wiertz
A. Poirier
Affiliation:
INRS-Énergie et Matériaux, Université du Québec, 1650 boul. Lionel-Boulet, Varennes (Québec), Canada, J3X 1S2
G. G. Ross
Affiliation:
INRS-Énergie et Matériaux, Université du Québec, 1650 boul. Lionel-Boulet, Varennes (Québec), Canada, J3X 1S2
P. Bertrand
Affiliation:
PCPM, Université Catholique de Louvain, Place Croix du Sud 1, 1348 Louvain-la-Neuve, Belgium.
V. Wiertz
Affiliation:
PCPM, Université Catholique de Louvain, Place Croix du Sud 1, 1348 Louvain-la-Neuve, Belgium.
Get access

Abstracr

The wetting property of polymers is very important in different applications such as biomaterials, textiles, aerospace (fluid management and materials processing in microgravity), and thin film adhesion. Therefore, there is a strong interest in the development of a new technology for the modification at will of this property. The use of low energy ion beams allows the modification of the first surface atomic layers. Nitrogen ions of 500 eV/at. were used to bombard the surface of polycarbonate (PC) samples to a fluence of 5×1016 at/cm2. Five different environments (oxygen, nitrogen, argon, dry air and vacuum) were used to store the samples for some hours (1 to 24 hours) after the implantation. Aging studies of the contact angle (advancing and receding) have shown that the environment gas influences the long term value of the contact angle and helps to maintain the stability of the treated surfaces with the passage of time. XPS and ToF-SIMS have been used to study the chemical effects of both N2+ ion irradiation and storage gas surrounding the samples. The results show faster aging in the case of the samples stored in vacuum, a harmful effect of nitrogen gas on the treatment and the formation of new chemical species for all treatments.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 504: Symposium KK – Atomistic Mechanisms in Beam Synthesis & Irradiation… , 1997 , 425
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Pageau, J.F., Ross, G.G., Couture, É., Poirier, A. and Quirion, F. in Ion-Solid Interactions for Materials Modification and Processing, edited by Poker, D.B., Ila, D., Cheng, Y.-T., Harriott, L.R. and Sigmon, T.W. (Mater. Res. Soc. Proc. 396, Pittsburgh, PA, 1996) p. 299.Google Scholar
2. Park, S.C., Jung, H.J. and Koh, S.K. in Ion-Solid Interactions for Materials Modification and Processing, edited by Poker, D.B., Ila, D., Cheng, Y.-T., Harriott, L.R. and Sigmon, T.W. (Mater. Res. Soc. Proc. 396, Pittsburgh, PA, 1996) p. 347.Google Scholar
3. Choi, W.K., Koh, S.K. and Jung, H.J., JVST A, 14 (4), p. 2366 (1996).Google Scholar
4. Zeigler, J.F., Biersack, J.P. and Littmark, U., The Stopping and Range of Ions in Solids, edited by Zeigler, J.F. (Pergamon, New York, 1985), p.321.Google Scholar
5. Éric Couture. Master's thesis, Université du Québec (INRS-É-nergie et Matériaux), 1995.Google Scholar
6. Beamson, G. and Briggs, D., High Resolution XPS of Organic Polymers. The Scienta ESCA300 Database, 1st ed. (Wiley, Chichester, 1992)Google Scholar
7. Gerenser, L.J., J. Adhesion Sci. Technol., 7 (10), p. 1019. (1993).Google Scholar
8. Briggs, C., and Seah, M.P. Practical Surface Analysis (2 éd.) vol.1: Auger and X-ray Photoelectron Spectroscopy, edited by Seah, M.P. (Wiley, New York, 1990).Google Scholar
9. Lhoest, J.-B., Bertrand, P., Weng, L.T. and Dewez, J.-L., Macromolecules, 28 (13), p. 4631 (1995)Google Scholar
10. Newman, J.G., Carlson, B.A., Michael, R.S., Moulder, J.F. and Hohlt, T.A. (editor), Static SIMS Handbook of Polymer Analysis, (Perkin-Elmer Corporation, Minnesota).Google Scholar
11. Briggs, D., Brown, A. and Vickerman, J.C., Handbook of Static Secondary Ion Mass Spectrometry., (John Wiley & Sons, New York).Google Scholar