Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-11-26T17:18:36.421Z Has data issue: false hasContentIssue false
  • English
  • Français

Modeling of Microstructure Evolution in Nb-Si Eutectic Alloy Using Cellular Automaton Method

Published online by Cambridge University Press:  01 February 2011

Kenichi Ohsasa  and
Seiji Miura
Kenichi Ohsasa
Affiliation:
[email protected], United States
Seiji Miura
Affiliation:
[email protected], Hokkaido Univ., Materials Science, Sapporo, Hokkaido, Japan
Get access

Abstract

A numerical model was developed for the simulation of microstructure evolution during the solidification of Nb-Si eutectic alloy. In this model, the cellular automaton method was used to simulate the eutectic growth of Nb solid solution and Nb3Si intermetallics. Diffusion in liquid, mass conservation at the solid/liquid interface and local equilibrium at the solid/liquid interface with consideration of curvature undercooling were solved to determine the positions of the Nb/liquid and Nb3Si/liquid interfaces. In the alloy with eutectic composition of 0.18at%Nb, irregular eutectic growth morphology was observed in relatively lower undercooling region. On the other hand, in higher undercooling region over 50K, dendrite morphology of Nb3Si was observed. An alloy with hypo-eutectic composition, cell and dendrite morphology were observed in lower undercooling region, while coupling eutectic morphology was formed in higher undercooling region over 25K.The growth velocity of the coupling growth increased with increase in the degree of undercooling of melt.

Keywords

simulationSiNb
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1128: Symposium U – Advanced Intermetallic-Based Alloys for Extreme Environment and Energy Applications , 2008 , 1128-U07-02
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1) Yang, X.L., Dong, H.B., Wang, W. and Lee, P.D.: Mater. Sci. Eng., A386, 129 (2004).Google Scholar
2) Yamazaki, M., Satoh, J., Ohsasa, K. and Matsuura, K.: ISIJ Int., 48, 362 (2008).Google Scholar
3) Spittle, J.A. and Brown, S.G.R.: Acta Metall. Mater. 42, 1811 (1994).Google Scholar
4) Nastac, L.: Acta Mater. 47, 4253 (1999).Google Scholar
5) Sekito et al., Y.::2008 MRS Fall Meeting, paper No.1128–U05–38 in this volume.Google Scholar