Hostname: page-component-cd9895bd7-jkksz Total loading time: 0 Render date: 2024-12-27T02:11:33.430Z Has data issue: false hasContentIssue false

Microwave Properties of Strontium Barium Niobate Thin Films Grown by Pulsed Laser Deposition

Published online by Cambridge University Press:  17 March 2011

Víctor Rodríguez-Santiago
Affiliation:
Department of Physics, University of Puerto Rico Mayagüez, PR 00681-9016
Yelitza González
Affiliation:
Department of Physics, University of Puerto Rico Mayagüez, PR 00681-9016
Félix E. Fernández
Affiliation:
Department of Physics, University of Puerto Rico Mayagüez, PR 00681-9016
Carl H. Mueller
Affiliation:
Communications Technology Division, NASA Glenn Research Center Cleveland, OH 44135-3191
Fred W. Van Keuls
Affiliation:
Communications Technology Division, NASA Glenn Research Center Cleveland, OH 44135-3191
Félix A. Miranda
Affiliation:
Communications Technology Division, NASA Glenn Research Center Cleveland, OH 44135-3191
Get access

Abstract

Strontium barium niobate (SrxBa1−xNb2O6 - SBN) with 0.25≤x≤0.75 is a ferroelectric material of interest for diverse optoelectronic applications. Dielectric properties of bulk SBN crystals were comprehensively studied over 30 years ago for a range of compositions and at frequencies up to 30 MHz, but there is little information on properties at higher frequencies. In particular, and up to the best of our knowledge, there are no published results about SBN thin film dielectric properties at high frequencies. For the study reported here, SBN thin films with x = 0.61 were grown on MgO and LaAlO3 substrates by Pulsed Laser Deposition (PLD). Films with good crystallinity and oriented with c-axis normal to the substrate surface were obtained on both types of substrates, while films on MgO had much better texture due to better lattice matching. Interdigital electrode (IDE) capacitors and coupled microstrip phase shifters (CMPS) were fabricated with both types of samples in order to study dielectric response. Capacitance of the IDE capacitors was measured at 1 MHz as a function of temperature and bias voltage, revealing very low losses but poor capacitance tunability, particularly for samples on MgO. Response of the CMPS structures was measured at room temperature and at high frequencies, up to 21 GHz. Insertion losses were measured up to 28 GHz.

Type
Research Article
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Xu, Y., Ferroelectric Materials, North-Holland, Amsterdam (1991).Google Scholar
2. Lines, M.E. and Glass, A.M., Principles and Applications of Ferroelectrics and Related Materials, Oxford University Press, Oxford (1977).Google Scholar
3. Glass, A.M., J. Appl. Phys. 40, 4699 (1969).Google Scholar
4. Lenzo, P.V., Spencer, E.G. and Ballman, A.A., Appl. Phys. Lett. 11, 23 (1967).Google Scholar
5. Megumi, K., Nagatsuma, N., Kashiwada, Y., and Furuhata, Y., J.Mater.Sci. 11, 1583 (1986).Google Scholar
6. Schwyn-Thöny, S., Youden, K.E., Harris, J.S., and Hesselink, L., Appl. Phys. Lett. 65, 2018 (1994).Google Scholar
7. Fernández, F.E., Liu, H., Jin, C., and Jia, W., Integrated Ferroelectrics 29, 111 (2000).Google Scholar
8. Mueller, C.H. and Miranda, F.A., Tunable Dielectric Materials and Devices for Broadband Wireless Communications, in Handbook of Thin Film Devices, (Francombe, M.H., ed.) Academic Press (2000) pags. 132139.Google Scholar