Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-25T15:49:59.920Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructure Development and Mechanical Properties of Ce-TZP/La- β-Alumina Composites

Published online by Cambridge University Press:  15 February 2011

Takashi Fujii ,
Hironobu Muragaki ,
Hiraku Hatano  and
Shin-Ichi Hirano
Takashi Fujii
Affiliation:
Technical Research Center, Nisshin Flour Milling Co., Ltd., 5-3-1 Tsurugaoka, Oi-machi, Saitama 354, Japan
Hironobu Muragaki
Affiliation:
Technical Research Center, Nisshin Flour Milling Co., Ltd., 5-3-1 Tsurugaoka, Oi-machi, Saitama 354, Japan
Hiraku Hatano
Affiliation:
Technical Research Center, Nisshin Flour Milling Co., Ltd., 5-3-1 Tsurugaoka, Oi-machi, Saitama 354, Japan
Shin-Ichi Hirano
Affiliation:
School of Eng., Nagoya Univ., Furo-cho, Chikusa-ku, Nagoya 464, Japan
Get access

Abstract

Simultaneous additions of lanthanum aluminate(LAL) and Al2O3 to Ce-TZP (12mol% CeO2-ZrO2) lead to the in-situ formation of lanthanum- β-alumina(LBA) platelets (∼1.0.μ m in width and 5 ∼10 μ m in length) in the Ce-TZP matrix during sintering. The composites showed a fracture toughness(SEPB method) of 9.5 MPa · m0.5 and fracture strength of 960 MPa. which are remarkably improved from Ce-TZP sintered body (8.5 MPa · m0.5 and 560 MPa).

The composites also exhibit the no degradation by hydrothermal treatment.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 274: Symposium R – Submicron Multiphase Materials , 1992 , 141
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Seto, T., Endo, T. and Shimada, M., J.Am.Ceram.Soc. 72(5), 761–764 (1989).CrossRefGoogle Scholar
2. Tsukuma, K., Takahata, T. and Shiomi, M.. Advance In Ceramics. Vol,24, (The American Ceramic Society, Columbus, OH 1988).p. 721.Google Scholar
3. Takahate, T., Tsukuma, K. and Yamamura, H., Yogyo-Kiso-Kageku-Toronkai Proc. 3A03(1987).Google Scholar
4. Fujii, T., Muragaki, H., Hatano, H. and Hirano, S., Ceramic Transactions, Vol,22, (The American Ceramic Society, Columbus, OH 1991), p. 693.Google Scholar
5. Mizuno, M., Berjoan, R.. Coutures, J.P. and Foex, M., Yogyo-Kyokai-shi, 92(12), 631–636 (1974).Google Scholar
6. Ropp, R.C. and Carrol, B.. J.Am.Ceram.Soc. 63 (7–8),416–19 (1980).Google Scholar
7. Toraya, H., Yoshimura, M. and Somiya, S., J.Am.Ceram.Soc. 67(6),C-119–121 (1984).CrossRefGoogle Scholar
8. Nose, T. and Fujii, T., J.Am.Ceram.Soc. 71(5),328–333 (1988).CrossRefGoogle Scholar