Hostname: page-component-cd9895bd7-gbm5v Total loading time: 0 Render date: 2024-12-27T02:35:28.892Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructure And Mechanical Properties Of Electroplated Cu Films For Damascene Ulsi Metallization

Published online by Cambridge University Press:  10 February 2011

V. M. Dubin ,
G. Morales ,
C. Ryu  and
S. S. Wong
V. M. Dubin
Affiliation:
Advanced Micro Devices, Sunnyvale, CA 94088, [email protected]
G. Morales
Affiliation:
Advanced Micro Devices, Sunnyvale, CA 94088, [email protected]
C. Ryu
Affiliation:
Center for Integrated Systems, Stanford University, Stanford, CA 94305
S. S. Wong
Affiliation:
Center for Integrated Systems, Stanford University, Stanford, CA 94305
Get access

Abstract

Copper has been deposited for filling sub-0.5 μm trenches by using electroplating. Electroplating with pulse plating conditions provides the high deposition rate (0.5–1 μm/min) and defect-free filling the 0.25 μm trenches and vias of high aspect ratio (>4:1). Enhanced copper electroplating at the trench bottom has been achieved. The median grain size of electroplated copper was measured to be about 1 jim and the lognormal standard deviation is about 0.4 μm. Strong <111> texture was observed in electroplated Cu film. Low stress of electroplated Cu films and excellent adhesion of plated Cu to sputtered Cu seed were observed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 505 , 1997 , 137
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Dubin, V.M., Shacham-Diamand, Y., Zhao, B., Vasudev, P.K. and Ting, C.H.. J. Electrochem. Soc., 144, 1997, 898–908.Google Scholar
2.Ting, C.H., Dubin, V.M. and Nogami, T.. Proc. of 13th VLSI Multilevel Interconnection Conference, p. 481, 1996.Google Scholar
3.Dubin, V.M., Ting, C.H. and Cheung, R.. Proc. of 14th VLSI Multilevel Interconnection Conference, p. 69, 1997.Google Scholar
4.Courtney, T. H.. Mechanical Behavior of Materials. Ed. McGraw-Hill Publishing Company.Google Scholar