Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-25T17:27:25.894Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructural Correlation with Electrical Properties for Y2O3 Doped CeO2 Thin Films

Published online by Cambridge University Press:  10 February 2011

Chunyan Tian  and
Siu-Wai Chan
Chunyan Tian
Affiliation:
School of Engineering and Applied Science, Materials Science Division, Columbia University, New York, NY 10027
Siu-Wai Chan
Affiliation:
School of Engineering and Applied Science, Materials Science Division, Columbia University, New York, NY 10027
Get access

Abstract

High quality textured 0.58% Y2O3 doped CeO2 films with (001), (111)/(001) and (110) were prepared using an e-beam deposition technique on substrates of (001) LaAlO3, r-cut sapphire, and fused silica, respectively. The composition and stoichiometry of the films were verified by Rutherford backscattering spectroscopy analysis. Both x-ray diffraction and transmission electron microscopy analyses gave consistent microstructural information. Complex impedance measurements have been performed to study the electrical properties of these films as a function of temperature. The conductivities of the films were dominated by grain boundaries of high conductivities as compared to that of the bulk ceramic of the same dopant concentration. The activation energies for the film conductivities were only slightly higher than that for the bulk lattice conductivities, but much lower than that for the bulk grain boundary conductivity. These results have been discussed in terms of the differences of the grain size and grain boundary microstructures between the films and the bulk ceramics.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 500: Symposium EE – Electrically Based Microstructural Characterization II , 1997 , 279
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Steele, B. C. H., Solid State Ionics, 12, 391–406 (1984).Google Scholar
2 de Souza, S., Visco, S. J., De Jonghe, L. C., Solid State Ionics, 98, 57–61 (1997)Google Scholar
3 Tsai, T., Barnett, S. A., Solid State Ionics, 98, 191–196 (1997).Google Scholar
4 Tian, C., Chan, S. W., Mat. Res. Soc. Symp. Proc. 575, 533 (1997).Google Scholar
5 Wang, D. Y., Nowick, A. S., J. Solid State Chem., 35, 325–333 (1980).Google Scholar
6 Gerhardt, R., Nowick, A. S., J. Ame. Ceram. Soc, 69[9], 641–646 (1986).Google Scholar
7 Tian, C. and Chan, S. W., Mat. Res. Soc. Symp. Proc, 411, 1996.Google Scholar
8 Tian, C., Du, Y., Chan, S. W., J. Vac Sci. Technol. A, 15 [1], 85–92 (1997).Google Scholar
9 Kosacki, I., Anderson, H. U., Appl. Phys. Lett., 69 [27], 4171–4173 (1996).Google Scholar