Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-25T17:42:53.346Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructural Control of Amorphous Silicon Films Crystallized using an Excimer Laser

Published online by Cambridge University Press:  10 February 2011

J.W. Viatella  and
R.K. Singh
J.W. Viatella
Affiliation:
Department of Materials Science and Engineering, University of Florida Gainesville, FL 32611
R.K. Singh
Affiliation:
Department of Materials Science and Engineering, University of Florida Gainesville, FL 32611
Get access

Abstract

The results of experiments using two techniques for microstructural control of laser-annealed silicon thin films on SiO2 substrates are given. In the first set, photolithographically fabricated single-crystal silicon seed wafers in intimate contact with the silicon films are used to show that it is possible to control nucleation location during laser annealing. Laser energy density was varied from 250–450 mJ/cm2 and the resultant microstructure was characterized using transmission electron microscopy (TEM). It was found to consist of four distinct regions. Areas adjacent to the seed consisted of grains with dimensions ∼ 0.5 μm. The surrounding region consisted of larger (∼ 1 μm) rectangular grains. A third region was observed sporadically and consisted of large (∼ 1.5 μm) rectangular grains adjacent to the latter region. The fourth region occurred several microns away from the contact and consisted of a fine-grained microstructure. In the second set, fine mesh (19 μm) masks were used to selectively crystallize regions in laser-annealed films. The resultant microstructure was characterized using TEM and was found to consist of large (∼ 1.5 μm) edge grains with smaller (∼ 0.8 μm) grains just inside of the edge grains. A theoretical discussion is presented to explain the observed phenomena in both experiment sets.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 472: Symposium I – Polycrystalline Thin Films - Structure, Texture, Properties..III , 1997 , 415
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Sameshima, T., Usui, S., Applied Physics Letters 59, 2724–2726 (1991).Google Scholar
2. Winer, K., Anderson, G. B., Ready, S. E., Bachrach, R. Z., Johnson, R. I., Ponce, F. A., Boyce, J. B., Applied Physics Letters 57, 2222–2224 (1990).Google Scholar
3. Sameshima, T., Materials Research Society Symposium Proceedings 283, 679–689 (1993).Google Scholar
4. Narayan, J., White, C. W., Aziz, M. J., Stritzker, B., Walthuis, A., Journal of Applied Physics 57, 564–567 (1985).Google Scholar
5. Im, J. S., Kim, H. J., Applied Physics Letters 64, 2302 (1994).Google Scholar
6. Im, J.S., Kim, H.J., Thompson, M.O., Appl. Phys. Lett. 63, 1969 (1993).Google Scholar
7. Im, J.S., Sposili, R. S., MRS Bulletin, 39, March 1996.Google Scholar
8. Ghandhi, S.K., VLSI Fabrication Principles p. 487 (John Wiley and Sons, 1982).Google Scholar
9. Chabal, Y.J., Hiagshi, G.S., Raghavachan, K., Burrows, V.A., J. Vac. Sci. Tech. A 7, 2104 (1989).Google Scholar
10. Viatella, J., Singh, R.K., Thakur, R., Sandhu, G., Mater. Res. Symp. Proc. 342, 297 (1994).Google Scholar
11. Tsao, J.Y., Peercy, P.S., Phys. Rev. Lett. 58, 2782 (1987).Google Scholar
12. Singh, R.K., Viatella, J., J. Metals, 44, 20 (1992).Google Scholar
13. Stiffler, S.R., Thompson, M.O., Phys. Rev. B 43, 9851 (1991).Google Scholar