Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-25T15:30:14.662Z Has data issue: false hasContentIssue false
  • English
  • Français

Micro/Nano Fabrication of Surface Architectures on Polymers and Copolymers Using Direct Laser Interference Patterning

Published online by Cambridge University Press:  01 February 2011

Diego Acevedo ,
Andrés Lasagni ,
Cesar Barbero  and
Frank Muecklich
Diego Acevedo
Affiliation:
[email protected], Universidad Nacional de Río Cuarto, Departamento de Química, Río Cuarto, X5804ZAB, Argentina
Andrés Lasagni
Affiliation:
[email protected], Georgia Institute of Technology, W. Woodruff School of Mechanical Engineering, Atlanta, GA, 30332-0405, United States
Cesar Barbero
Affiliation:
[email protected], Universidad Nacional de Río Cuarto, Departamento de Química, Río Cuarto, X5804ZAB, Argentina
Frank Muecklich
Affiliation:
[email protected], Saarland University, Functional Materials, Saarbruecken, N/A, Germany
Get access

Abstract

Novel surface engineering techniques of polymeric materials are essential to produce advanced topographies which could for example serve to modulate cell and tissue response in bio-materials. Direct Laser Interference Patterning (DLIP) permits the fabrication of repetitive arrays and microstructures by irradiation of the sample surface with coherent beams of light. Furthermore, the most important advantage of this method is that no additional process steps are required in comparison with other top-down or bottom-up techniques. In this study, we report a novel method for the advanced design of architectures in polymers using a single step process, as well as photo-activation of polymers with low absorption coefficient using a second polymer with relative high absorption coefficient. Previously calculated interference patterns using the well known interference theory could be directly produced on polymeric surface. Moreover, the cross-section of the structured polymers changes depending on the intensity of the laser beams, and photomachinability of polymers is highly influenced by laser wavelength. High absorbance of the polymeric materials at specific wavelengths allows the reduction of the laser intensity required to achieve a determined structure depth. For (60:40 %) polymethylmetacrylate/polystyrene copolymer substrate, different structures types were observed depending on the laser intensity including swelling and ablation of the material.

Keywords

polymerlaser ablationstructural
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1054: Symposium FF – Synthesis and Surface Engineering of Three-Dimensional Nanostructures , 2007 , 1054-FF01-07
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Geissler, M., Xia, X., Adv. Mater. 16, 1249 (2004).Google Scholar
2. Xia, Y., Whitesides, G. M., Angew. Chem. 37, 550 (1998).Google Scholar
3. Blatter, A., Maillat, M., Pimenov, S.M., Shafeev, G.A., Simakin, A.V., Trib. Lett. 4, 37 (1998).Google Scholar
4. Mücklich, F., Lasagni, A., Daniel, C., Int. J. of Mat. Res. 97, 1337 (2006).Google Scholar
5. Lasagni, A., Holzapfel, C., F. Mücklich, Proc. Mat. Res. Soc. Symp. 890–Y04, 02.1 (2006).Google Scholar
6. Scientific Advisory Panel on Reprocessing of Medical Devices (SAP-RMD), Health Canada, February 10–11, 2005).Google Scholar
7. Sutcliffe, E., Srinivasan, R., J. Appl. Phys 60, 3315 (1986).Google Scholar
8. Efthimiopoulos, T., Kiagias, C., Heliotis, G., Helidonis, E., Canadian Journal of Physics 78, 509 (2000).Google Scholar
9. Krajnovich, D., J. Phys. Chem. A 101, 2033 (1997).Google Scholar
10. Lasagni, A., Acevedo, D., Barbero, C., Mücklich, F., Adv. Eng. Mater. 9, 99 (2006).Google Scholar
11. Srinivasan, R., Braren, B., Casey, K.G., Yeh, M., J. Appl. Phys., 67, 1604 (1990).Google Scholar
12. Estler, R., Nogar, N., Appl. Phys. Lett. 49, 1175 (1986).Google Scholar