Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-29T06:56:43.306Z Has data issue: false hasContentIssue false
  • English
  • Français

A Methodology for Reliability Assessment of Non-Ductile Encapsulants

Published online by Cambridge University Press:  26 February 2011

Boon Wong  and
David C. Sandkulla
Boon Wong
Affiliation:
Hughes Aircraft Company, El Segundo, California 90245
David C. Sandkulla
Affiliation:
Hughes Aircraft Company, El Segundo, California 90245
Get access

Abstract

This paper presents a probabilistic fracture-mechanics based methodology for the reliability assessment of non-ductile encapsulants. The study used an alumina-epoxy encapsulant as a working example and assessed the reliability in terms of (1) fast fracture and (2) delayed failure behavior of the material.

Applying the Weibull probabilistic model to flexural strength data, survival probabilities and strength requirements against fast fracture of the encapsulant under various stress states were quantified. Unifying the probabilistic concept and linear elastic fracture mechanics (LEFM), the probabilistic lifetime of the encapsulant was predicted as a function of stress magnitude, stress state, and material size. Merging the results obtained from this study with the mechanical response results independently acquired from finite element analysis (FEA) one may then establish conservative design margins for the encapsulant used in various electronic assemblies.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 226: Symposium H – Mechanical Behavior of Materials and Structures in Microelectronics , 1991 , 97
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Richerson, D.W., Modern Ceramic Engineering, Marcel Dekker, Inc., New York and Basel, 1982.Google Scholar
[2] Kingery, W.D., Bowen, H.K., and Uhlmann, D.R., Introduction to Ceramics, Second Edition, John Wiley & Sons, New York, 1976.Google Scholar
[3] Freiman, S.W., “Fracture Toughness Testing of Brittle Materials,” in Encyclopedia of Materials Science and Engineering, Vol. 3, pp. 1868–1871, Pergamon Press, 1986.Google Scholar
[4] Evans, A.G., “Slow Crack Growth in Brittle Materials under Dynamic Loading Conditions,” Intl. J. Fract., Vol. 10, No. 2, pp. 251–259, 1974.Google Scholar
[5] Ritter, J.E. and Sherburne, C.L., “Dynamic and Static Fatigue of Silicate Glasses,” J. Am. Ceram. Soc., Vol. 54, No. 12, pp. 601–605, 1971.Google Scholar
[6] Davidge, R.W., Mechanical Behavior of Ceramics, Cambridge University Press, Cambridge, 1979.Google Scholar
[7] Weibull, W., “A Statistical Distribution Function of Wide Applicability,” J. Appl. Mech., Vol. 18, pp. 293–297, 1951.Google Scholar
[8] Batdorf, S.B., “Fracture: Statistical Theories,” in Encyclopedia of Materials Science and Engineering, Vol. 3, pp. 1858–1864, Pergamon Press, 1986.Google Scholar
[9] Weil, N.A., and Daniel, I.M., “Analysis of Fracture Probabilities in Nonuniformly Stressed Brittle Materials,” J. Am. Ceram. Soc., Vol. 47, No. 6, pp. 268–274, 1964.Google Scholar
[10] Kapur, K.C., and Lamberson, L.R., Reliability in Engineering Design, John Wiley & Sons, New York, 1977.Google Scholar
[11] Evans, A.G., “A Method for Evaluating the Time-Dependent Failure Characteristics of Brittle Materials and its Application to Polycrystalline Alumina,” J. Mater. Sci., Vol. 7, No. 10, pp. 1137–1146, 1972.Google Scholar
[12] Evans, A.G. and Wiederhorn, S.M., “Proof Testing of Ceramic Materials an Analytical Basis for Failure Prediction,” Intl., J. Fract., Vol. 10, No. 3, pp. 379–392, 1974.Google Scholar
[13] Wiederhorn, S.M., in Fracture Mechanics of Ceramics, Vol. 2, pp. 613–646, Edited by Bradt, R.C., Hasselman, D.P.H., and Lange, F.F., Plenum, New York, 1974.Google Scholar
[14] Wiederhorn, S.M., in Microstructure and Properties of Ceramic Materials, pp. 303–319, Edited by Yen, T.S. and Pask, J.A., Science Press, Beijing, China, 1984.Google Scholar