Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-25T17:37:32.335Z Has data issue: false hasContentIssue false
  • English
  • Français

Methodologies for Predicting the Performance of Ni-Cr-Mo Alloys Proposed for High Level Nuclear Waste Containers

Published online by Cambridge University Press:  10 February 2011

D. S. Dunn ,
G. A. Cragnolino  and
N. Sridhar
D. S. Dunn
Affiliation:
Center for Nuclear Waste Regulatory Analyses Southwest Research Institute 6220 Culebra Road San Antonio, TX 78238–5166
G. A. Cragnolino
Affiliation:
Center for Nuclear Waste Regulatory Analyses Southwest Research Institute 6220 Culebra Road San Antonio, TX 78238–5166
N. Sridhar
Affiliation:
Center for Nuclear Waste Regulatory Analyses Southwest Research Institute 6220 Culebra Road San Antonio, TX 78238–5166
Get access

Abstract

For the geologic disposal of the high level nuclear waste (HLW), aqueous corrosion is considered to be the most important factor in the long-term performance of containers, which are the main components of the engineered barrier subsystem. Container life, in turn, is important to the overall performance of the repository system. The proposed container designs and materials have evolved to include multiple barriers and highly corrosion resistant Ni-Cr-Mo alloys, such as Alloys 625 and C-22. Calculations of container life require knowledge of the initiation time and growth rate of localized corrosion. In the absence of localized corrosion, the rate of general or uniform dissolution, given by the passive current density of these materials, is needed. The onset of localized corrosion may be predicted by using the repassivation and corrosion potentials of the candidate container materials in the range of expected repository environments. In initial corrosion tests, chloride was identified as the most detrimental anionic species to the performance of Ni-Cr-Mo alloys. Repassivation potential measurements for Alloys 825, 625, and C-22, conducted over a wide range of chloride concentrations and temperatures, are reported. In addition, steady state passive current density, which will determine the container lifetime in the absence of localized corrosion, was measured for Alloy C-22 under various environmental conditions.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 556: Symposium QQ – Scientific Basis for Nuclear Waste Management XXII , 1999 , 879
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. U.S. Department of Energy, Repository Safety Strategy: U.S. Department of Energy's Strategy to Protect Public Health and Safety After Closure of a Yucca Mountain Repository, YMP/96-01 Rev. 1, Washington, DC: U.S. Department of Energy, Office of Civilian Radioactive Waste Management, 1998.Google Scholar
2. U.S. Department of Energy, Site Characterization Progress Report Yucca Mountain, Nevada, DOE/RW-0505, U.S. Department of Energy, Office of Civilian Radioactive Waste Management, Washington, DC: 1998.Google Scholar
3. Sridhar, N., Dunn, D. and Cragnolino, G., in Scientific Basisfor Nuclear Waste Management XVIII, edited by Murakami, T. and Ewing, R.C. (Elsevier Science Publishers, New York, 1995) pp. 663–670.Google Scholar
4. Sridhar, N., Cragnolino, G.A., and Dunn, D.S., Experimental Investigations of Failure Processes of High Level Nuclear Waste Container Materials, CNWRA 95-010, Center for Nuclear Waste Regulatory Analyses, San Antonio, TX 1995.Google Scholar
5. Amano, T., Kojima, Y. and Tsujikawa, S., in Scientific Basisfor Nuclear Waste Management XVIII, edited by Murakami, T. and Ewing, R.C. (Elsevier Science Publishers, New York, 1995) pp. 727–734.Google Scholar
6. Shoesmith, D.W., King, F., and Ikeda, B.M., in Scientific Basis for Nuclear Waste Management XIX, Edited by William Murphy, M. and Knecht, Deiter A. (Elsevier Science Publishers, New York, 1996) pp. 563–570.Google Scholar
7. Mohanty, S., Gragnolino, G.A., Ahn, T., Dunn, D.S., Lichtner, P.C., Manteufel, R.D., and Sridhar, N., Engineered Barrier System Performance Assessment Code: EBSPAC Version 1.1, Technical Description and User's Manual, CNWRA 97-006, Center for Nuclear Waste Regulatory Analyses, San Antonio, TX 1997.Google Scholar
8. Tsujikawa, S. and Okayama, S.. Corrosion Science 31, 441–446, (1990).Google Scholar
9. Renner, M., Heubner, U., Rockel, M.B., and Wallis, E.. Werkstoffe and Korrosion 37, 183–190 (1986).Google Scholar
10. Okayama, S., Uesugi, Y., and Tsujikawa, S.. Corrosion Engineering 36(3) 157–168. (1987).Google Scholar
11. Kolts, J. and Sridhar, N., in Corrosion of Nickel-Base Alloys- Conference proceedings of the international conference on corrosion of nickel base alloys, (American Society for Metals publications, 1995) pp. 191–198.Google Scholar
12. Gruss, K.A. Cragnolino, G.A. Dunn, D.S. and Sridhar, N., CORROSION/98 paper 149 NACE International, Houston, TX (1998).Google Scholar
13. Brossia, S., Dunn, D. and Sridhar, N., Effects of Environmental Factors on Container Life, CNWRA 98-008, Center for Nuclear Waste Regulatory Analyses, San Antonio, TX 1998.Google Scholar
14. Dunn, D.S., Pan, Y.-M., Cragnolino, G.A., and Sridhar, N., in Scientific Basis for Nuclear Waste Management XIX, edited by Murphy, William M. and Knecht, Deiter A. (Elsevier Science Publishers, New York, 1996) pp. 581–588.Google Scholar
15. Cieslack, M.J., Headley, T.J., and Romig, A.D. Jr. Metallurgical Transactions 17A, 2035–2047 (1986).Google Scholar
16. Cieslack, M.J., Knorovsky, G.A., Headley, T.J., and Romig, A.D. Jr. Metallurgical Transactions 17A, 2107–2116 (1986).Google Scholar
17. Jones, R.H. and Brummer, S.M., in Environment-Induced Cracking of Metals, NACE-10 edited by Gangloff, R.P. and Ives, M.B., (NACE International Houston, TX, 1990) pp. 287–310.Google Scholar