Hostname: page-component-cd9895bd7-q99xh Total loading time: 0 Render date: 2024-12-27T02:13:52.768Z Has data issue: false hasContentIssue false
  • English
  • Français

Metallic glass fluid flow during welding using self-propagating reactive multilayer foils

Published online by Cambridge University Press:  01 February 2011

Albert J. Swiston ,
Timothy P. Weihs Jr ,
Omar M. Knio  and
Todd C. Hufnagel
Albert J. Swiston
Affiliation:
Department of Materials Science and Engineering, The Johns Hopkins University Baltimore MD 21218
Timothy P. Weihs Jr
Affiliation:
Department of Materials Science and Engineering, The Johns Hopkins University Baltimore MD 21218
Omar M. Knio
Affiliation:
Department of Mechanical Engineering, The Johns Hopkins University, Baltimore MD 21218
Todd C. Hufnagel
Affiliation:
Department of Materials Science and Engineering, The Johns Hopkins University Baltimore MD 21218
Get access

Abstract

We use a fluid mechanics model to analyze glass fluid flow during the welding of bulk metallic glasses with reactive multilayer foils acting as local heat sources. The resulting welded joints were shear tested, and fracture surfaces were analyzed by optical microscopy. Fracture surfaces of failed metallic glass joints show distinct regions of metal-metal veins that indicate effective metallurgical bonding. We observe a monotonic increase in the failure strength of the joints with the fraction of the joint composed of such veins. For the strongest joint tested (shear strength of 420 MPa), nearly 60% of the fracture surface is comprised of metal-metal veins. We have developed a qualitative fluid mechanics explanation of the welding process, in which shear stresses (due to pressure applied during joining) push the reactive foil from the joint interface and create the metal-metal veins. The welding process is more effective at higher joining pressure and greater foil thickness, leading to increased joint strength.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 806: Symposium MM – Amorphous and Nanocrystalline Metals , 2003 , MM2.3
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Weihs, T.P., Self-Propagating Reactions in Multilayer Materials, in Handbook of Thin Film Process Technology. (IOP, Bristol, 1998).Google Scholar
2. Wang, J., Besnoin, E., Duckham, A., Spey, S.J., Reiss, M.E., Knio, O.M., Powers, M., Whitener, M., Weihs, T.P., Appl. Phys. Lett., 83 (19) 3987–3989 (2003).Google Scholar
3. Swiston, A. J. Jr, Hufnagel, T.C., and Weihs, T.P.. Scripta Mater. 48 (12) 1575–1580 (2003).Google Scholar
4. Masuhr, A., Waniuk, T.A., Busch, R., and Johnson, W.L.. Phys. Rev. Lett., 82 (11) 2290–2293 (1999).Google Scholar
5. Lu, J., Ravichandran, G., and Johnson, W.L.. Acta Mater., 51 (12) 3429–3443 (2003).Google Scholar
6. Bakke, E., Busch, R., and Johnson, W.L.. Mater. Sci. Forum, 225 95–100 (1996).Google Scholar
7. Berlev, A., Bobrov, O.P., Csach, K., Kaverin, V.L., Khonik, V.A., Kitagawa, K., Miskuf, J., and Yurikova, A.. J. Appl. Phys., 92 (10) 5898–5903 (2002).Google Scholar