Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-29T07:39:31.503Z Has data issue: false hasContentIssue false
  • English
  • Français

Metal Oxide and Metal Carbide Thin Film Coatings on Large Spherical Particles

Published online by Cambridge University Press:  10 February 2011

Richard C. Stephenson  and
Richard E. Partch
Richard C. Stephenson
Affiliation:
Center for Advanced Materials Processing and Department of Chemistry, Clarkson University, Potsdam, NY 13699–5814
Richard E. Partch*
Affiliation:
Center for Advanced Materials Processing and Department of Chemistry, Clarkson University, Potsdam, NY 13699–5814
*
* To whom correspondence should be addressed.
Get access

Abstract

Synthesis and characterization of titanium and zirconium oxide and carbide thin films (1–25 μm) on spherical substrates is reported. Hydrolysis of an appropriate metal alkoxide precursor in aqueous acid yields the amorphous metal oxide coating. Thermal treatment can produce the highly crystalline phases of the oxides or, in the presence of a carbon containing reducing gas, the metal carbide. Scanning electron microscopy and x-ray diffraction have been used to study the surface morphology and the crystallographic structure of the coating films. Morphological characteristics strongly depend on the acid species and acid strength used during hydrolysis. The thickness of the film is also governed by control of the acid hydrolysis step.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 458: Symposium W – Interfacial Engineering for Optimized Properties , 1996 , 435
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Bunshah, Rointan, “Deposition Technologies for Films and Coatings,” Noyes Publications, Park Ridge, NJ, 1982.Google Scholar
2. Prassas, Michel and Hench, Larry, “Physical Chemical Factors in Sol-Gel Processing,” in Ultrastructure Processing of Ceramics, Glasses, and Composites, edited by Hench, Larry and Ulrich, Donald, John Wiley and Sons, New York, 1984, p. 100.Google Scholar
3. Boyd, T, “Preparation and Properties of Esters of Polyorthotitanic Acid,” J. Polymer Sci, 7, 591 (1951).Google Scholar
4. Matijevic, Egon, “Monodispersed Colloidal Metal Oxides, Sulfides, and Phophates,” in Ultrastructure Processing of Ceramics, Glasses, and Composites, edited by Hench, Larry and Ulrich, Donald, John Wiley and Sons, New York, 1984, p. 334.Google Scholar